Results 11 to 13 of 13
Thread: Bad vibration from 25-80mph
03-16-2013, 12:39 PM #11
LoL, I just realized what you meant! I see that the original post was 2009 and someone resurrected it. Well, I hope that he got it fixed by now!!!
- - - Updated - - -
Last edited by Pikey; 03-16-2013 at 10:16 PM.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
03-16-2013, 10:09 PM #12Unless the u-joints have never been replaced. Then they are held in with a plastic that requires melting the plastic to get the u-joint out. I would NEVER hammer on a drive shaft or yoke. Either use a press or a C-clamp with the proper sized sockets to push the u-joints in and out. Hammering them is a good way to bend a ear on a yoke or a drive shaft. Which can turn into an expensive mistake.94 Chevrolet K1500 4x4. 5.7L 350, 5-speed (AKA Betty) Or Rust Bucket...depends on if I'm mad at her.
03-16-2013, 11:21 PM #13
- - - Updated - - -
fy 2009 means For Year 2009 .
By Z-71 in forum Chevy Silverado Forum (GMC Sierra)Replies: 17Last: 02-10-2012, 05:23 PM
By 88stepside in forum GM PowertrainReplies: 0Last: 11-29-2009, 12:44 PM
By CornhuskerChevy in forum Audio, Video & Gadget TechReplies: 2Last: 08-09-2009, 09:35 PM
By jdog468 in forum General Chevy & GM Tech QuestionsReplies: 7Last: 02-26-2009, 10:08 AM
By makthenif in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 0Last: 12-19-2007, 07:17 PM
Tags for this Thread