Results 1 to 3 of 3
Thread: 2x4 convert to a 4x4
09-07-2009, 07:35 PM #1
- Join Date
- Sep 2009
2x4 convert to a 4x4
i just bought a 2005 chevy silverado 2500 hd, and well unfortunately it has 2 wheel drive, it was the only thing the bank would let me afford and i needed the warranty with it. but i would like to convert it to a 4wheel drive outfit, and keep it stock, and possibly convert it to a straight front axle. what kind of labor, and cost would be involved in this project?
09-07-2009, 07:51 PM #2
Way more than it's worth. You are looking at complete axle with correct gear ratio (good luck finding one that matches), transmission modifications, exhaust modifications, crossmember mod or replace, computer mods, possible wiring harness mods and frame mods for the front suspension change. I'm sure there are other issues I have missed. Better off to just buy a 4x4 to begin with. As far as cost, it will be expensive, and without researching the parts you will need it's difficult to say for sure. Good Luck.1994 Silverado 1500 2 wheel drive 350 TBI Auto (4L60E). Standard Cab / Bed, all power.
Impala SS Club of America Member# 2122
09-07-2009, 07:55 PM #3
i'm sure its possible, butit would take ALOT of modding and welding.2006 Silverado Z71 - 97,000 - totaled, RIP
2006 Silverado Z71 - 122,000 (K&N 77 Series CAI, PowerAid TBS, Magnaflow dual rear exit, 33x12.50 Mickey Thompson MTZ, Tuff Country Torsion Keys, Tuff Country Add-A-Leafs)
1966 C10 swb stepside (Gen I 350, Turbo 400 trans, dual cyl power brakes, front discs)
I'll keep my money, guns, and freedom. You keep the Change.
By Pats1pab1 in forum GM PowertrainReplies: 4Last Post: 04-23-2010, 08:56 PM
By jiriley in forum Lifted & Offroad SuspensionReplies: 3Last Post: 03-04-2010, 11:36 AM
By suburban2500 in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last Post: 11-14-2009, 10:05 PM
By bostic220 in forum Performance & FuelReplies: 2Last Post: 02-22-2009, 03:03 PM
By Steve in forum Chevy S10 Forum (GMC Sonoma)Replies: 2Last Post: 05-27-2007, 03:10 PM
Tags for this Thread