GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4

Thread: Chip advise

  1. #1
    Newbie
    Join Date
    Oct 2009
    Location
    Saint Louis, MO
    Posts
    2

    Default Chip advise

    Are performance chips advisable for the 6.0 gas? I'm looking for power not speed. Thanks in advance.

  2. #2

    Default

    What year, model etc, because I think most the newer ones use programmers or custom tuned ecu's instead of chips.
    David
    2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
    http://www.gmtruckclub.com/forum/sho...Silverado-2500
    1960 Land Rover Series II 88
    2001 Pontiac Sunfire
    2013 Toyota Avalon Limited (Wife's Car)
    NRA Life Member

  3. #3

    Cool Chip advice

    Anything from 1996 to current doesnt have a removeable E-Prom (chip). You can use a programmer, I like the Diablo because you can fine tune your trucks ecm more than wit Superchips and Hypertech. The Diablo will work if you have basic bolt-ons (CAI, exhaust,headers). If you have a cam,head work etc. than you should go with a custom tune from Diablo,Blackbear,Wheatly, Nelson and Wait4Me.

  4. #4
    Newbie
    Join Date
    Oct 2009
    Location
    Saint Louis, MO
    Posts
    2

    Default Chip Advice Programmer..

    Please excuse the lack of information included in my first post. The whole story is as follows
    1. 2009 2500 HD Z71 4Door
    2. Need opinions on scraping up as much pulling power as I can out of the stock 6.0 (there will not be any interior work done on the engine (thats what I have my Harley for).
    3. Exterior I have a K&N replacement.
    4. Looking for opinions on programmers......
    5. Looking for opinions on staying single exhaust or going duel.
    6. if single, what muffler replacement would give optimal power?
    7. If duel, what muffler would give optimal power?
    Thanks in advance.

Similar Threads

  1. After market advise
    By bosoxx2004 in forum Chevy Truck Accessories
    Replies: 2
    Last: 02-12-2010, 03:48 PM
  2. NEED advise, 77 350....
    By 77chevy in forum GM Powertrain
    Replies: 1
    Last: 08-03-2009, 07:28 AM
  3. Chip Programer Advise
    By tazss in forum GM Powertrain
    Replies: 8
    Last: 05-29-2009, 04:04 AM
  4. Advise
    By prodchevy in forum Performance & Fuel
    Replies: 9
    Last: 03-23-2008, 06:51 PM
  5. need advise about H.I.D.s
    By focker21 in forum Chevy Trailblazer Forum (GMC Envoy)
    Replies: 0
    Last: 09-19-2007, 09:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •