GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 6 of 6
  1. #1

    Default Greetings from the north coast, Rochester NY

    Hi all,
    I found this great club and forum while looking for some info about my new wheels. Just bought a creampuff '93 GMC Sub. 2wd with only 90,000 miles. It's been a western NY truck all its life but the previous owner only towed a camper with it in the summer and kept it parked in the garage during our long salt (snow) season. Pretty much rust free, even the alloy wheels still look great. All it needed was a radio that worked but I see from reading other posts that's a common problem. Put an aftermarket one in and some good speakers and it's good as new. This is my 5th GM truck, 6th if you count the wifes '03 s10 Blazer. I bought this truck to replace my '98 Dakota. We bought the Dodge new ( had a weak moment!) and drove it as far as we could (115,000 miles) but the rust has taken over and it's time to put her out of her misery. I came to my senses and returned to GM and I'm glad I did. Got lots of room for my boys hockey gear and a teammate or three when we travel to Canada for tournaments. I know from my first Suburban that this one will be a real halftrack in the snow, even without 4wd. I plan on having this truck for another ten years and 100,000 more miles. It's good to know that when I need to maintain or repair it I'll be able to check with the GM Truck Club forums and find out how to do it!

    Attached Thumbnails Attached Thumbnails 10230_100687619949759_100000255630637_16626_5458495_n.jpg  

  2. #2
    Eddie Z71's Avatar
    Join Date
    Mar 2009
    Colorado Springs, CO
    Blog Entries


    Hi, and welcome to the site!!!
    Eddie , 2000 Chevy Tahoe Z71 (old style)

  3. #3
    Master Mechanic
    Join Date
    Sep 2008
    Dallas, Texas
    Blog Entries


    Welcome to the site!
    Visit for all your Chevy Parts needs. These are factory OEM GM Parts with full GM warranty (unless otherwise stated).

    Parts For: Buick / Cadillac / Chevrolet / GMC / Hummer / Oldsmobile / Pontiac / Saturn

    877-347-6220 (New Expanded Hours)
    Monday to Friday - 7 AM to 6 PM Central
    Saturday - 8 AM to 2 PM Central

  4. #4


    Welcome to the site! Looks like you found a "keeper"!

    2010 Z/71 Colorado C/C
    Black 4X4 w/5.3L V8
    2007 Winnebago Adventurer
    w/8.1L Chevy & Allison 6spd.
    Canyon Lake, Texas

  5. #5


    Welcome to the site!


    '94 Chevy Suburban K1500
    3" exhaust w/ aero turbine non-baffled muffler
    CFM Technologies TB spacer
    CB w/ 44" whip antenna

  6. #6


    Welcome to the site!

    Bobby - North Carolina
    2008 4x4 5.3L V8
    6" Suspension Lift and 1.5" Body Lift
    20x9 Ballistic Jesters w/35" Toyo Open Country MT's & 1.5" rear wheel spacers
    4:56 Yukon Gears
    Hypertech Speedometer Calibrator
    Baja style bed mount spare tire carrier
    Flowmaster 40 series dual exhaust
    Recon Smoked LED tails/3rd brake lights/black projectors w/switchback LED's in the corners
    N-Fab Nerf Steps
    K&N CAI
    No Fear Pedals
    Tint, Line-X bedliner, Window visors, Rear wheel well liners
    Painted front grill, bow ties and door badges, de-"lettered" tailgate
    Powder coated front and rear bumpers

Similar Threads

  1. Greetings from Rochester NY
    By Deadkennedys29 in forum Member Introductions
    Replies: 6
    Last: 06-18-2010, 01:48 PM
  2. Rochester Carburetor
    By charlie268 in forum General Chevy & GM Tech Questions
    Replies: 10
    Last: 03-29-2009, 11:05 AM
  3. TahoeBabe From West Coast 2 East Coast and Back!
    By TahoeBabe in forum Member Introductions
    Replies: 7
    Last: 09-17-2008, 09:46 AM
  4. Greetings from Rochester, WAshOut
    By Robert1951 in forum Member Introductions
    Replies: 4
    Last: 04-22-2008, 05:09 PM
  5. Are fuel cells the future? - Rochester Democrat and Chronicle [Expired Topic]
    By ChevyFan in forum Chevy Equinox Forum (GMC Terrain)
    Replies: 0
    Last: 02-10-2008, 12:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts