GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 Last Post byLast Post by
Results 1 to 10 of 15
  1. #1

    Default P1351 check engine code

    my moms 97 tahoe sport has been having a starting issue thats pissin me off.... it's got a good tuneup(plugs.cap.rotor.wires) i changed the coil and the ignition control module as well and still the code stays on there it sounds like it's missing when it does get started however.... anyone have any ideas?
    it's a 350 motor vortec
    Nothin like a liftd truck goin muddn

  2. #2

    Default

    Also check fuel pressure. I kinda did a quick search on that code and looks like you have tried most of the common fixes. read this thread http://www.gm-trucks.com/forums/inde...howtopic=84428 and maybe it will give you an idea. Not sure if it will help. Hopefully it does.
    David
    2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
    http://www.gmtruckclub.com/forum/sho...Silverado-2500
    1960 Land Rover Series II 88
    2001 Pontiac Sunfire
    2013 Toyota Avalon Limited (Wife's Car)
    NRA Life Member

  3. #3

    Default

    that links not working lol...
    yeh i beleive i tried almost everything most common with this issue. i;ll check fuel pressure maybe i;ll be able to figure something out... now if there is no fuel pressure where would i start???

  4. #4

    Default

    it worked just a minute ago but I will try to find it again

  5. #5

    Default

    http://www.google.com/search?q=p1351...HY&safe=active

    ok try this. it should be the second search result down. the one from gm-trucks.com. couldn't get the link to work otherwise.

  6. #6

    Default

    Quote Originally Posted by dsfloyd View Post
    http://www.google.com/search?q=p1351...HY&safe=active

    ok try this. it should be the second search result down. the one from gm - trucks. couldn't get the link to work otherwise.
    thanks for the sites im gonna look into it all thanks for your help i'll keep you posted.

  7. #7

    Default

    the code is for ign coil control circuit high voltage. doesnt neccesarily mean you have high Voltage but its a good possibility you have a short

    you need to focus on possible faulty ground or feed from ign module, poor connections at vcm or a failed vcm

    make sure you dont have any loose connectors
    Last edited by Loggerhead Mike; 10-09-2009 at 01:47 PM.
    GM TECH

    05 silverado shortbed

  8. #8

    Default

    well i have recently searched for the same issues around all seem to be poiintng to fuel issues

    the other day mom drove the truck and it started up fine she drove down the road and it just died, no warnings just shut off...

    i beleive it's fuel related i have to hook up a fuel gauge to it under the hood...

  9. #9

    Default

    Most of the time a P1351 is caused by an ignition switch problem from what I've seen.
    Jim

    2004 SILVERADO 2500HD LS
    Pro Comp Leveling Kit
    285-75-16 Cooper ST All Terrains
    Pro Comp Programmer
    Bilstein Shocks
    Linux Bed Liner
    Tinted Windows



    Other rides:

    1967 Landcruiser <350 Chevy>
    1970 Camaro
    1990 Geo Metro Convertible
    2007 FJ Cruiser

  10. #10

    Default

    thats what my uncle said to me too...
    b.c we changed the coil,igni control module

    so it could possibly be the ignition switch than right

Page 1 of 2 12 Last Post byLast Post by

Similar Threads

  1. Check Engine Lite On/ code P0101/
    By Madman in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 5
    Last: 07-21-2012, 04:19 PM
  2. P0446 EVAP Code (check engine light)
    By ippielb in forum GM Powertrain
    Replies: 14
    Last: 09-30-2011, 02:56 PM
  3. Check engine code
    By WI_z71 in forum General Chevy & GM Tech Questions
    Replies: 4
    Last: 06-27-2008, 04:25 PM
  4. OBDII CODE READING (check engine)
    By doug in forum Chevy Colorado Forum (GMC Canyon)
    Replies: 1
    Last: 02-13-2007, 07:00 PM
  5. check engine
    By doug in forum Chevy C/K Truck Forum
    Replies: 3
    Last: 02-10-2007, 01:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •