I have a 2004 gmc 1500 z71 with a 6 inch bds suspension lift, 20 inch wheels and 35 inch nitto A/T's. The front tires rub and i want some more clearance, i was looking into a 3 inch body lift with bumper relocation and gap guards. Will I be alright staying with 35 inch tires after doing the body lift? Will it look weird. Does anybody have a 6 suspension and 3 body and 35's with pics?
how bad do they rub?i would try a leveling kit before i went with a 3 inch body.i think itd be much easier and cheaper
-Dylan
2004 Silverado 4x4
4.8L
1986 K5 Blazer
8" Superlift w/39.5 super swampers
1992 GMC Jimmy "Blue Bomber"
4.3L Vortec
Welcome to the site Cody.


Welcome to the site. I have an 08 1500 with a 6 inch BDS lift, 20 inch rims and 35 inch tires and had the same problem with rubbing. I installed a 1 1/2 inch leveling kit in the front and replaced the block in the back for a larger one. Rubbing is gone.
Bobby - North Carolina
2008 4x4 5.3L V8
6" Suspension Lift and 1.5" Body Lift
20x9 Ballistic Jesters w/35" Toyo Open Country MT's
4:56 Yukon Gears
Hypertech Speedometer Calibrator
Baja style bed mount spare tire carrier
Flowmaster 40 series dual exhaust
Recon Smoked LED tails and 3rd brake lights
N-Fab Nerf Steps
K&N CAI
No Fear Pedals
Tint, Line-X bedliner, Window visors, Rear wheel well liners
Painted front grill, bow ties and door badges, de-"lettered" tailgate
Powder coated front and rear bumpers

Hi, and welcome to the site!![]()
Eddie , 2000 Chevy Tahoe Z71 (old style)


Welcome to the forum!
If you find yourself slipping,.....tie a knot.....hold on tight
Black
2008 silverado
1500 crew cab
5.3 L 4x4
Borla exhaust, rbp black tip
tint, bed liner
2.25 in ready lift leveling kit
18x9 rbp 94r
33x12.5x18 toyo mts
how bad do they rub..do the just rub on the valance on the front bumper...just trim it a little and rubbing will go away i have a 6 inch and 35's..but it's really a 4 inch lift...mine doesnt rub with front valance trimmed
2004 chevy silverado "northwest edition" lifted on 35's
1990 cherokee lifted on 32's
Thanks guys, it runs pretty good in the front, but my fenders have already been shaved a little. How much more clearance would the leveling kit give me? I have my torsion bars adjusted to were my truck is sittin level now. Keep all the good advice comin.


Welcome to the club!
It's got to be the offset or backspacing for the rims, because I have seen people with that setup and they have had it all done with just a 6" suspension lift. I believe that Darcy has that exact setup on here as well, his screen name is Dwill3015 check out his albums he is also a moderator.![]()
Bookmarks