Results 1 to 1 of 1
Thread: 98 Jimmy 4x4 switch
11-01-2009, 03:44 PM #1
- Join Date
- Mar 2008
98 Jimmy 4x4 switch
O.K., the 4x4 was not kicking in on my 98 Jimmy. A mechanic at the GM dealership where I work stated that it was probably the encoder motor. I just swapped the encoder motor with one from a salvage yard. It seemed to work fine at first, but now it is still doing the same thing:
4x4 Hi will not respond/engage from 2Hi (either from park or neutral). When you push the 4 Hi button, nothing happens, or it flashes and kicks back to 2 Hi. If you put the vehicle in neutral, allow the vehicle to roll and push 4 Lo, the 4x4 lights blink and the 4x4 kicks in, but bothe the 4 Hi and 4 lo buttons stay illuminated. Are they supposed to both stay illuminated?
According to the owners manual, if they do this then the 4x4 switch needs to be adjusted. How do I know if I have another bad encoder motor or a bad 4x4 switch? Can the 4x4 switch be adjusted? What else might the problem be? Any help would be greatly appreciated.
By zachary23 in forum Chevy Blazer Forum (GMC Jimmy)Replies: 8Last Post: 09-03-2010, 10:13 PM
By letisports in forum Member IntroductionsReplies: 9Last Post: 06-22-2009, 10:11 PM
By otis24 in forum GM PowertrainReplies: 4Last Post: 02-28-2009, 07:43 PM
By willbur in forum General Chevy & GM Tech QuestionsReplies: 12Last Post: 02-18-2009, 06:50 PM
By cocopuffs69 in forum Performance & FuelReplies: 2Last Post: 03-12-2008, 04:44 PM