GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default 89 s10 clutch master cylinder/bleeding

    I have a 89 s10 2.5 4 cylinder that had a leaky clutch master cylinder, so I replaced it and now I have been trying to bleed it two different ways without success (gravity bleed) and (pumping clutch and slave bleeder valve).


    I read something about tilting it at 45 degress, but im pretty sure that will be impossible with all the brake lines in the way, if anyone has any suggestions , Im all ears

    Right now the clutch pedal goes down with little effort...

    thanks !
    Last edited by jackofallammo; 11-15-2009 at 08:01 AM.

  2. #2

    Default ugh

    I still have not solved the problem of bleeding the clutch master cylinder....

Similar Threads

  1. Where is my clutch master cylinder?
    By gt1009 in forum General Chevy & GM Tech Questions
    Replies: 2
    Last: 12-13-2009, 08:18 AM
  2. New master cylinder or rebuild kit
    By ACracing in forum General Chevy & GM Tech Questions
    Replies: 4
    Last: 06-22-2009, 08:32 AM
  3. Black sludge in my clutch master cylinder...WTF
    By chopper72 in forum General Chevy & GM Tech Questions
    Replies: 4
    Last: 12-08-2008, 03:32 AM
  4. Swapping out Master Cylinder ???'s
    By 4x4_only in forum Lifted & Offroad Suspension
    Replies: 3
    Last: 11-01-2008, 06:32 PM
  5. Master Cylinder is it Bad?
    By ceyermann in forum Lifted & Offroad Suspension
    Replies: 4
    Last: 08-13-2007, 06:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •