GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 3 of 3

Thread: CB coax

  1. #1

    Default CB coax

    Has anybody found a good way to run coax from a cb antenna to the inside of a suburban without drilling any holes?

  2. #2

    Default

    I've just been running mine through the door jambs. Run it through a door that's the most seldom opened to try to protect the coax for the longest.
    Christopher

    1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
    2005 Saturn ION-2 Stock 265K miles
    1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half



    There are 10 kinds of people, those who understand binary, and those who dont...

    Remember kids, the only difference between screwing around and science is writing it down- Adam Savage

  3. #3

    Default

    depends on the year. Mine's an older one, an '88, so it's not that difficult to find a grommet through the firewall that can be enlarged a bit to allow the coax to go through. haven't tried it on a newer model Suburban, but have tried on other newer model year vehicles, & it can be a PAIN! several of them when given the choice between having to deal with drilling holes, or premature wearing of the coax, the owners of the vehicles I was working on chose the coax through the door approach.
    Jim
    1988 Chevy V-10 Suburban 4x4, 350 TBI, 33x12.50's
    1965 Chevy C-10 Pickup, 250 inline six, 3 on the tree.

Similar Threads

  1. CB coax
    By moron in forum Chevy Truck Accessories
    Replies: 5
    Last Post: 12-04-2009, 08:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •