Results 1 to 3 of 3
Thread: CB coax
11-29-2009, 05:45 PM #1
- Join Date
- Nov 2009
Has anybody found a good way to run coax from a cb antenna to the inside of a suburban without drilling any holes?
11-30-2009, 08:25 AM #2
- Join Date
- Feb 2007
- Blog Entries
I've just been running mine through the door jambs. Run it through a door that's the most seldom opened to try to protect the coax for the longest.Christopher
1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
2005 Saturn ION-2 Stock 265K miles
1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half
There are 10 kinds of people, those who understand binary, and those who dont...
Remember kids, the only difference between screwing around and science is writing it down- Adam Savage
12-29-2009, 06:45 PM #3
depends on the year. Mine's an older one, an '88, so it's not that difficult to find a grommet through the firewall that can be enlarged a bit to allow the coax to go through. haven't tried it on a newer model Suburban, but have tried on other newer model year vehicles, & it can be a PAIN! several of them when given the choice between having to deal with drilling holes, or premature wearing of the coax, the owners of the vehicles I was working on chose the coax through the door approach.Jim
1988 Chevy V-10 Suburban 4x4, 350 TBI, 33x12.50's
1965 Chevy C-10 Pickup, 250 inline six, 3 on the tree.
By moron in forum Chevy Truck AccessoriesReplies: 5Last Post: 12-04-2009, 08:51 PM
Tags for this Thread