Results 1 to 2 of 2
12-08-2009, 12:57 PM #1
- Join Date
- Dec 2009
Newbie with 94 Suburban 2wd issues
I just purchased a 94 2wd suburban and my electric driver's seat, power mirrors and power door locks do not work. Is there a relay that I need to check. I looked at the fuses under the dash on the driver's side but I could not identify which ones may be for these options. Also, it looks as though I'm going to have to replace my blend door actuator as I have no heat and I'm getting that ticking and beeping sound under the dash on the passenger side. I looked at the instructions and diagram on the No Heat thread but it doesn't seem to pertain to my year because when I remove the glove box the actuator is not visible. Any help with any of these issues would be highly appreciated. I'm ready to get her on the road. I'm having a new exhaust installed on Thursday so I'm pretty excited.
12-08-2009, 06:45 PM #2
- Join Date
- Nov 2006
- Canyon Lake, Texas
- Blog Entries
Welcome to the site! Sounds like you are on the right track with fuses. I'm not sure where they would be located if not under the dash. Hopefully someone can give you some help. Good luck!
2010 Z/71 Colorado C/C
Black 4X4 w/5.3L V8
2007 Winnebago Adventurer
w/8.1L Chevy & Allison 6spd.
Canyon Lake, Texas
By socal77k5 in forum GM PowertrainReplies: 1Last: 06-12-2010, 06:05 PM
By ShortyzKustomz in forum Audio, Video & Gadget TechReplies: 11Last: 11-07-2009, 10:40 AM
By artlock in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 1Last: 07-30-2009, 02:38 PM
By KonaBurb in forum Chevy SUV & Crossover Tech ForumReplies: 1Last: 10-30-2008, 10:12 PM
By ljjcsauto in forum GM PowertrainReplies: 4Last: 05-31-2008, 07:56 AM
Tags for this Thread