Results 1 to 4 of 4
Thread: Rim Width
12-15-2009, 07:46 PM #1
- Join Date
- Dec 2009
i'm in alot of trouble, im not sure what width the factory 20's are and i already bought a set of BF At's 325/60/20
im not sure they will fit, if anyone can let me know, i'd appriciate it...
email me at firstname.lastname@example.org
12-15-2009, 07:58 PM #2
On your Factory 20'in Rim,are 9in Width.The tire you mentioned,325/60/20 has the following,
Overall Diameter of 354in
Overall Width of 12.4in
At 35.4in Overall diameter might be tight Depending on the setup you have????
Last edited by 99'HEARTBEAT; 12-15-2009 at 08:16 PM.
5.3 l 3.73 l G80
BLACK BEAR CUSTOM TUNE
SNUGTOP l COLORMATCH l KATZKIN
12-15-2009, 08:01 PM #3
Factory 20's are 8.5" wide, I'm running 305's so 325 will fit fine as far as width(only 3/4" wider) you'll need a lift to fit 35"tall tires on pretty much anything,here's a couple of pics so you can see how they fit widthwise on factory rims.
Last edited by adampaul1964; 12-15-2009 at 08:05 PM.Adam
12-15-2009, 08:02 PM #4
Thanks Adam,I was not sure on the width??.....
Last edited by 99'HEARTBEAT; 12-16-2009 at 12:03 AM.
By 04-silverado in forum Chevy Silverado Forum (GMC Sierra)Replies: 12Last: 05-19-2010, 06:31 PM
By Z28Johnny in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 12Last: 03-01-2010, 03:23 AM
By ajfdirtrider in forum Lifted & Offroad SuspensionReplies: 2Last: 01-30-2010, 10:39 PM
By GM_Guy in forum The Coffee Shop ~ Chit ChatReplies: 9Last: 07-06-2007, 01:41 PM
Tags for this Thread