GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5
  1. #1

    Default 94 GMC suburban,rear running lights/dash lights fuse?

    the other night my dash lights and rear running lights went out. is there a fuse for this or what? i looked in the fuse box under the stearing wheel and couldnt find any fuses for it. am I not looking in the right place?

    thanks

  2. #2

    Default

    Yes, there is definitely an instrument panel fuse for your headlights. Exactly what it's labeled at the moment escapes me, but there are a couple of possibilities. It's probably either the 20-amp in the upper-left-hand corner labeled "GAUGES" or the one two right and one down labeled "CTSY".

    If all your fuses are good, it's most likely the headlight switch. I had a similar problem where all the lights would work except the dash lights. The fuses were all good, but one day the headlight switch started burning. Turned out there was a short in the switch itself. Keep an eye on that!

  3. #3
    Newbie
    Join Date
    Dec 2009
    Location
    Wheelersburg, Ohio (southern Ohio)
    Posts
    4

    Default fuse panel...

    This happened to me last week with my newly acquired '94 Suburban. I shorted the circuit as I was changing turn signal bulbs. I think you'll also find that your horn is out and your front marker lights are out as well.

    After i finally found the fuse panel (!), I also couldn't quite figure things out from the labels, so I looked a little differently at the situation. I looked for a burned out fuse! The fuse is rated at 20 amps (yellow) and it is on the right side, but generally toward the middle.

    Even if you pull out the wrong one to check it, they are easy to slide back in. Once I found the fuse panel it was a 30 second job.

    By the way, the fuse panel is easy to find once you know how obviuos it is! Find your parking brake release HANDLE. Then look about three inches to the right. There is a little indentation in the plastic panel that you pull on and the panel come right off, exposing one of the easiest-to-change fuse panels that you will ever see.
    Last edited by rockettruck; 12-21-2009 at 10:16 AM. Reason: added information...

  4. #4

    Default

    GL with the fix!
    1997 K1500 Silverado 4X4. Black Exterior, grey/black interior. 35X12.50X15 wheels and rubber, ProComp 6inch lift 6 shocks in the front 2 in the rear, 3 inch body lift, a few cosmetic mods. Nothing major. Custom leather interior, and stereo upgrade is the future mods.


  5. #5
    Jr. Mechanic
    Join Date
    Dec 2009
    Location
    Deep River Ontario
    Posts
    100

    Default

    it would be a common circuit issue, ie ground or control switch. try running a straight 12v source to the dash and tail and test from there

Similar Threads

  1. 1999 suburban daytime running lights question
    By ochs99 in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 7
    Last Post: 04-15-2010, 06:44 PM
  2. 1994 silverado no instrument lights dash lights
    By woodslip in forum Audio, Video & Gadget Tech
    Replies: 3
    Last Post: 07-12-2009, 11:47 PM
  3. rear lights indicators Internal fuse blows
    By bensdive in forum General Chevy & GM Tech Questions
    Replies: 5
    Last Post: 02-22-2009, 07:25 AM
  4. fuse blowing for tail and dash lights. **SOLVED
    By Whits96 in forum General Chevy & GM Tech Questions
    Replies: 4
    Last Post: 01-06-2009, 08:56 AM
  5. 1999 Suburban Running Lights
    By hac20853 in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 5
    Last Post: 04-13-2008, 11:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •