GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 8 of 8

Thread: Amber DRLs

  1. #1

    Default Amber DRLs

    I had a burned out DRL (just like everyone else who has one of these rigs!) and decided to replace them with ambers. I never did find a picture of this "mod" on this site, so I thought I would post a few pics that I took. I didn't think about the fact that these are only going to be seen during the day until after I took these night pics, but they were alot brighter than I thought they would be. Not bad for $6 for a pair!! Now I have to get matching amber bulbs for the turn signals, cuz they aren't quite the same shade of amber, and I am just weird that way...

    I would still be interested in seeing any pics of any high power LEDs that were installed for DRLs. The strongest one I could find was 3 watt, but it only projected light forward, so there would be no light for the reflector in the back of the lense.







    Last edited by aboston; 01-02-2010 at 11:47 PM. Reason: Reduced pictures to more reassonable size!
    2006 GMC Sierra 2500HD Duramax


  2. #2

    Default

    Looks cool. I like it
    Red 05 Silverado. Ram-Air Hood w/custom paint. Cold Air Intake, Black 20" Wheels w/Polished Lip. Lowered 2" in rear, Tint, Custom Front Bumper, Flowmaster Dual Exhaust, Color Matched Grill w/Billet Inserts, Debadged Tailgate, Red LED Underdash Lighting, DDMTuning HID's - 8000k in lows & fogs. Smoked Foglights

  3. #3
    Sr. Apprentice Triton911BJ's Avatar
    Join Date
    Aug 2009
    Location
    Tunkhannock, PA
    Posts
    32

    Default

    i did this with my chevy... i pefer the ambers rather than the regualr bulps. i think it looks better overall
    2005 Silverado Z71 Vortec 5.3L



    Tunkhannock,PA

    Triton Hose Co. No. 1 (Station 7)-Firefighter/Engineer
    Meshoppen Fire Company (Station 2)-Firefighter
    Tunkahnnock Community Ambulance (Station 1)-Driver
    Mehoopany Ambulance Squad (Station 4)-Driver
    Wyoming County 911 Center-Dispatcher/Call Taker

  4. #4
    Legend
    TRPLXL2's Avatar
    Join Date
    Jan 2009
    Location
    Norwalk, Ohio
    Posts
    3,368
    Blog Entries
    8

    Default

    The amber DRL look real nice, I do actually have some experience with the LED's. What bulb # did you buy that's in there now, did you get the 4114? If so they aren't going to last that long, I have always pulled the 4114 bulbs out and replaced them with 3157 and I have never had one burn out on me. Just make sure the wattage is the same and you'll be fine, a ton of people do this and I have never heard them complain about burnt out bulbs.

    On to the LED thing the DRL socket is horrible for LED's, IF you do decide to do the LED conversion make sure that you spend the money for a good ceramic load resistor to resist heat buildup. That particular wiring harness has a lot of fluctuation in voltage, which will make your new LED's last about 2 days literally. I bought a set of Putco 360 degree tower bulbs amber color for my turn signals, and I also bought a set of hyper white 360 tower bulbs for the DRL and I bought 4 load resistors for that setup. I it will be insanely bright but expensive, I already have $100 just in what I mentioned so I don't want to take any chances.

    Another thing you can get through Putco is Heavy Duty harnesses, they have larger relays and wiring to also increase the light output. I haven't escalated to that level of insanity...........yet.
    2004 Chevy Colorado
    LS1 5.7 swap/TBSS rear axle swap

  5. #5

    Default

    I replaced them with the 3157's. They are actually pretty bright in the daylight. I would like them to be a bit brighter, but I don't think I am ready to spend that kind of cash on DRLs (yet).

    As far as the LEDs, would you need a load resistor for the DRLs? Since they aren't connected to anything that needs to see a load like a flasher or anything like that, I thought that I could just plug them in. Or are they? Would it be to compensate for the fluctuating voltages? I did not know that a resistor would be used for that.

    If you have that stuff already installed, I would love to see some pics.

    Thanks!

  6. #6
    Master Mechanic TritonBoulder47's Avatar
    Join Date
    Nov 2009
    Location
    Tunkhannock, PA (North East)
    Posts
    809

    Default



    I got'em

    Tim a.k.a. Da' Boulder

    2003 Chevrolet Avalanche Z71 - Custom Emergency Response POV

    Firefighter, Fire Policeman, Ambulance Driver, Rescue Tech, Emergency Lighting Installer

    Tint, 20's, Bull Bar, Intake, Exhaust, Billet Grill, Stereo, Custom Console, Emergency Equipment, and the list goes on...

  7. #7
    Jr. Mechanic
    Join Date
    Jun 2008
    Location
    South Carolina
    Posts
    77

    Default

    About 18 months back there was a nice article about converting the 4114 DRLs to LED and the guy cut a power wire and put in a resistor to cut the voltage. I tried to find it on a search but no luck. I talked to someone who had the LED replacements but he said without a voltage drop they are history pretty quick.

  8. #8
    Legend


    Enkeiavalanche's Avatar
    Join Date
    Apr 2010
    Location
    Piermont,NY, back in Northern NJ now, But may be in IL soon....
    Posts
    5,361

    Default

    Those of us in the Avalanche clubs all have them and what they call FTDRL's meaning they are on day and night.. There are many posts and writeup's on how to do this some are real easy like on 02's others you have to put in diods or relays.. But this is how you can tell a member is coming towards you...
    08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X

Similar Threads

  1. Temporary disable DRLs???
    By peacekeeper in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 4
    Last: 03-02-2007, 01:25 PM
  2. Altec: Amber Screamer Bars
    By rmreid in forum General Classifieds
    Replies: 1
    Last: 02-25-2007, 08:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •