Results 1 to 4 of 4
Thread: Blower Motor RESISTOR Help???
01-09-2010, 11:29 AM #1
- Join Date
- Nov 2009
Blower Motor RESISTOR Help???
95 Tahoe 4wd. Blower stopped the other day and I bought a resistor as it sounds like this is the issue. I attempted to install it today. Seemed like a pretty easy plug in part. My issue is I cannot find it??
I looked at a diagram online that I located from this sites sticky threads and it llooks like it is inside the dash under the heater control panel but after getting in there it looks all sealed up and I cannot see it, let alone replace it and I do not even know for sure that it is even there.
Do I need to remove the whole dash to replace this? Is there a trick? am I in over my head?
Thanks for any help - heat is a nice thing in Michigan this time of year.
01-09-2010, 12:22 PM #2
How to change the blower motor resistor on the 1993 Suburban
Remove the glovebox. I don't know if the 95 has the bracket mounted relays in the way like they are on my 93. The blower motor resistor should be visible as pictured. (pics of my 1993 Burb)
For the 1993 there were both round and square resistor types. The 1995 has a different style connector.
RELAY BRACKET PIC
BLOWER MOTOR RESISTOR LOCATION (93 model relay)
BLOWER MOTOR RESISTOR PIC (95 model)
There is no way to happiness....happiness is the way.:yipi:
High Desert SoCal
93 K1500 burb (personal) 350 AT 3" Lift 250K+
02 Honda Civic LX
Looking for a 1990's Miata for an engine swap
01-09-2010, 07:59 PM #3
- Join Date
- Nov 2009
Thank you - I will gie that a shot tomorrow. This site is so helpful.
01-10-2010, 10:01 AM #4
Glad we can help. Take some of your own pics and post them back here. Be sure to check the connector, I've heard a few reports that the overheated resistor burns the connectors.
By TheShamrock7 in forum Chevy Trailblazer Forum (GMC Envoy)Replies: 14Last: 09-08-2010, 01:02 PM
By Red Rado in forum Audio, Video & Gadget TechReplies: 4Last: 10-22-2009, 04:44 PM
By 74 scamp in forum General Chevy & GM Tech QuestionsReplies: 1Last: 02-21-2009, 01:02 PM
By tomis24 in forum Member IntroductionsReplies: 1Last: 12-20-2008, 09:17 AM
By Silvr00 in forum General Chevy & GM Tech QuestionsReplies: 1Last: 02-15-2008, 12:42 PM
Tags for this Thread