Results 1 to 10 of 13
Thread: cab roof lights install?
01-11-2010, 06:53 PM #1
cab roof lights install?
just bought a set of recon led cab roof lights for my 08 2500hd (without cab lights). anyone ever install and wire these up, and is it difficult to do?☆ 2008 CHEVY 2500HD CREW CAB 4x4 LS 6.0L ☆
☆ VOLANT COLD AIR INTAKE ☆
☆ RECON SMOKED CAB ROOF LIGHTS ☆
☆ RECON LED INTERIOR DOME CONVERSION ☆☆GIBSON SIDE SWEPT EXHAUST ☆☆ RBP 4 1/2 EXHAUST TIP ☆
01-11-2010, 09:21 PM #2
well i put some on my truck, it was amber lights, like a $20 kit. I thought it was extremely easy too do. the hardest part was ripping part of my roof lining down too run the wiresNick-Larmie
2004 chevy Silverado 4X4
Cold Air Intake
01-11-2010, 10:39 PM #3
X2 on the roof lining other then that just wire to running lights
99 tahoe 2 dr. 4x4 7.4 4L80-e NP246, SAS, dana 60 hp, sterling 10.5 rear, gibson headers, and alot of tricks of the trade !!!!!!IF YOU'RE NOT CHEATING YOUR NOT TRYING!!!!!!!!
01-16-2010, 03:14 PM #4
is there a connector avail for use for the cab roof lights?? I;m going to be doing this to my truck soon and instead of hacking into the wiring would like to use avail connections but worse case senerio I'll just have to hard wire them into my 06 z71, which location did you guys use???06 Z71 Silverado Military Style!!!
Red Seal Certified Automotive Service Technician
01-17-2010, 08:20 PM #5
I've done chicken lights in running boards that work with the marker lights.I dont know if they left a pgi tail for you to tap. Wouldn't hurt to test a few if ya find some look where the factory over head plug is. The lead to the mark lights might run that for and not continue with your harness
01-17-2010, 08:42 PM #6
You can buy a factory harness from a GM dealer or I think it's called gm parts direct online.1997 Chevy K3500
4x4 X-Cab Dually
454 Dual Exhaust
01-17-2010, 09:35 PM #7
- Join Date
- Jan 2010
post pics!!! add would they look stupid on a non diesel????
01-17-2010, 09:51 PM #8
01-18-2010, 10:55 AM #9
01-18-2010, 10:58 AM #10
Didn't they come on some 3/4-ton gassers too?
I'd like to put some cab lights on mine, but being a completely stock 1/2-ton I don't think I could pull it off until it's at least lifted some with bigger tires.Current truck: 1996 Ford 250, 7.3 Powerstroke diesel. Dana 60 SAS, stage 1 160cc injectors, T500 High Pressure Oil Pump, TS 6-position chip, full 4" exhaust, intake, 285 Falken Rocky Mountain AT's, boost/EGT/trans temp pillar gauges, etc...
By Augy123 in forum Audio, Video & Gadget TechReplies: 4Last Post: 04-03-2011, 04:07 AM
By bowtie11 in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 02-28-2010, 12:13 PM
By stagutters in forum Chevy Truck AccessoriesReplies: 6Last Post: 05-18-2009, 08:05 AM
By Charles Dempsey in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 02-27-2008, 07:44 PM
By Crawdaddy in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 4Last Post: 02-27-2007, 06:27 PM