Results 1 to 7 of 7
Thread: help on fuel filter!!!
01-13-2010, 05:05 PM #1
help on fuel filter!!!
so i tried replacing my fuel filter. i got rid of the pressure then sprayed some pb blaster to loosen the bolts. i got the bolt on the right side off easy but i stripped the one on the left so i used vise grips. the vise grips got grip but now the side of the fuel filter is bent and i think its leaking a little gas!
i dont know what to do and i need advice quickk
Last edited by Silverado1500; 01-13-2010 at 05:12 PM.
01-13-2010, 05:45 PM #2
You are not going to lose a alot of fuel just whatever is in the lines. If there is alot you may want it to let it drain and clear the lines to keep fuel from getting in your eyes.
01-13-2010, 05:53 PM #3
01-13-2010, 06:16 PM #4
help on fuel filter
Becareful with the vise grips, you can egg shape the fuel line nuts and they wont screw back into the new filter. Also put a rag over the old filter and use a pan under it. It seems like alot of fuel comiong out because of pressure but its really not that much fuel that comes out. See if you can borrow line wrenchs to use on the fuel line nuts.
01-13-2010, 06:21 PM #5
01-13-2010, 06:31 PM #6
help on fuel filter
Sorry I cant help anymore.
01-15-2010, 10:44 PM #7
alright i finally got it fixeddd. took it to this place called Dyke and ask what they could do to fix it and they said it would take 320 and i was like WTH?!
so i took it to my friend's dad which turns out to be a mechanic and he fixed it for me for 20 bucks. it was a relief...
By 178kchevy in forum Performance & FuelReplies: 6Last Post: 04-06-2009, 12:59 PM
By jnt412 in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 01-06-2009, 11:28 PM
By MWright936 in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 07-25-2008, 02:31 PM
By Tom Evans in forum GM PowertrainReplies: 10Last Post: 11-19-2007, 11:09 AM
By pastured1 in forum Announcements & FeedbackReplies: 3Last Post: 04-03-2006, 03:40 PM
Tags for this Thread