Results 1 to 4 of 4
Thread: Front Bow Tie?
01-17-2010, 06:09 PM #1
Front Bow Tie?
i wanted to paint my bowtie black and i had some black duplicolor for painting wheels left over. would this be good paint to use?
and should i prime also?
so sand, then prime, then sand again?, then paint?
do i have to sand between every coat?
i also have duplicolor clear coat, should i use that also?
01-17-2010, 06:44 PM #2
don't sand between coats
2009 Silverado LT1: All Star Edition
5.3 Liter V8 4x4
Locking Rear Differential
3.73 Rear Axle
Factory Remote Start
Rear Wheel House Liners
Molded Mud Flaps
Stainless Nurf Bars
Driver Information Center
20% Tinted Windows
Low Profile Diamond Plate Tool Box
GM Bed Liner
Silver Birch Metallic Mirror Covers
Silver Birch Metallic Vent Visors
Flowmaster Super 40 (knock off)
Bed Rail Protectors
Extang Tonneau Cover
01-17-2010, 07:12 PM #3
- Join Date
- Jul 2009
- Blog Entries
i would just lay it on according to the instructions on the can. it seems pretty simple once you read them. just make sure you give it plenty of time to cure
01-17-2010, 07:26 PM #4
- Join Date
- Nov 2009
- south jersey
id recommend using using plastic paint and primer it has a little more flexibilty with out cracking...scuff, prime, wet sand, base coat, clear99 4x4
slp exh. 20s
goodmark cowl hood
By SoCal Chevy in forum Chevy Truck AccessoriesReplies: 33Last Post: 10-09-2010, 11:51 AM
By brettg in forum Chevy Truck AccessoriesReplies: 6Last Post: 01-17-2010, 02:47 PM
By biggestbastian in forum Chevy Truck AccessoriesReplies: 0Last Post: 09-09-2009, 09:55 AM
By newportcustomz in forum Lifted & Offroad SuspensionReplies: 1Last Post: 05-30-2008, 11:03 PM
By asstda2b in forum Chevy Trailblazer Forum (GMC Envoy)Replies: 3Last Post: 12-21-2005, 02:59 AM
Tags for this Thread