Results 1 to 10 of 10
Thread: long travel?
01-20-2010, 11:22 PM #1
anyone on here have any expierence with long travel kits for their silverados?05 silverado 1500 4.8L v8
Dougs headers electric cut out
AEM brute force intake
Superchips flashpaq tuner
Airaid throttle body spacer
kmc enduro beadlocks
33 inch hankook dynapros
4 inch cst lift spindles, rancho 5000 shocks
"if your not livin on the edge, your takin up too much room"
01-21-2010, 09:23 AM #2
Well.. I've got deaver f87's and bms shackles in the rear, going to build a bed cage in spring when it gets warm enough to feel my fingers when working in the garage.. Long travel definitely isn't cheap, I can tell you that!
Otherwise if you can sift through a bunch of stupid posts, you can find a lot of decent information on dezertrangers.com too.
01-21-2010, 06:44 PM #3
how are the f87s? that was my plan for the back...im thinking something inexpensive like a cst long travel kit for the front
01-22-2010, 09:41 AM #4
I haven't taken the truck on anything major offroad yet (just some small fire roads in the woods mainly), but for normal driving they're not much different than the stock springs for ride quality. With the longer rear shackles, the ride height is maybe an inch above stock. The rear end really squats more than it used to when you hook up a trailer though.
Sometime in spring or summer after I put in a bed cage and some better shocks I want to take it out to some sand dunes and see how it does..
01-22-2010, 11:28 AM #5
- Join Date
- Jul 2009
- Blog Entries
Have you seen the way the TireGate company truck is set up? they have an awesome set of shock mounts in the bed of their silverado.
01-25-2010, 02:31 AM #6
yeah that white chevy? thats how i wanna do my truck up somthin simple i can drive day to day but still put my bike in the back and go mess around in the desert
01-25-2010, 11:42 AM #7
- Join Date
- Jul 2009
- Blog Entries
It would be sick if you could build a sideways mount that would mount your shock under the rear fender and give you long travel without poking out of the bed. some of the off-road racers use that system for blackhawk shocks. could be expensive though
01-25-2010, 08:38 PM #8
well I guess if you were really ambitious and you had the money you could maybe do a cantilever setup but thatd be awfully tricky not mention expensive...the other option is to push the shock mounts way back under the frame and run longer shock...a guy down my street did it for his exploder and hasnt complained about it since.
01-26-2010, 08:10 PM #9
http://www.cstsuspension.com/product...2/productID/93 It's probably the least expensive and easiest kit you will find and works pretty good if you don't plan on beating the crap out of your truck. If you want to hit whoops at 40+mph go with either the Camburg kit http://www.camburg.com/?p=412 or JD fabs kit http://jdfabrication.com/index.php?o...d=36&Itemid=63 These kits are much more stout and handle some serious off road abuse. You will need to fabricate or have some one else fabricate coilover mounts and some other stuff to install these kits. They are also very expensive so you better have some money saved up.Mike G
HID Specialist: If you need a HID for a bike,quad, truck etc let me know.
01-26-2010, 10:10 PM #10
Yeah and thats the kit im thinkin about doin...Hows your buddy like it?
By Steve in forum Chevy Volt ForumReplies: 0Last Post: 06-19-2010, 05:40 AM
By adidasboy918 in forum Lifted & Offroad SuspensionReplies: 0Last Post: 05-12-2010, 08:33 PM
By Stealth in forum Lifted & Offroad SuspensionReplies: 4Last Post: 02-04-2010, 08:40 PM
By dwill3015 in forum The Coffee Shop ~ Chit ChatReplies: 0Last Post: 12-13-2007, 12:36 AM
By brownbomb in forum The Coffee Shop ~ Chit ChatReplies: 4Last Post: 11-17-2006, 06:25 PM