Results 1 to 8 of 8
Thread: Manual to Power
01-21-2010, 08:48 PM #1
Manual to Power
Does anyone have any idea about how hard it might be to put power windows and locks in my 98 Chevy K-1500, right now I have manual locks and windows. Can anyone explain how this can be done.
01-21-2010, 08:55 PM #2
You should be able to search for it... It's not that hard... They make universal kits, or you can go to a salvage yard and get all the parts you'll need...
Tim a.k.a. Da' Boulder
2003 Chevrolet Avalanche Z71 - Custom Emergency Response POV
Firefighter, Fire Policeman, Ambulance Driver, Rescue Tech, Emergency Lighting Installer
Tint, 20's, Bull Bar, Intake, Exhaust, Billet Grill, Stereo, Custom Console, Emergency Equipment, and the list goes on...
01-21-2010, 08:57 PM #3
I'm going to the salvage yard this weekend, I might get the power locks and windows, but can they easily be installed.
01-21-2010, 09:00 PM #4
All the mounting locations should already be there... Just as long as you get it from the same model span that you currently have... Just take note on how you un-install it from the doner truck and you should be able to re-install it on your truck...
01-21-2010, 09:02 PM #5
01-21-2010, 09:53 PM #6
No prob man... Good luck!!!
01-22-2010, 10:40 AM #7
- Join Date
- Jul 2009
- Blog Entries
Let us know how it turns out
01-22-2010, 03:15 PM #8
By 1suburban4leo in forum Chevy Silverado Forum (GMC Sierra)Replies: 4Last: 08-18-2009, 08:23 PM
By mkruluts in forum General Chevy & GM Tech QuestionsReplies: 1Last: 06-04-2009, 06:09 AM
By lilriki509 in forum Chevy Colorado Forum (GMC Canyon)Replies: 2Last: 02-26-2009, 08:57 PM
By hogair in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last: 11-21-2007, 11:33 PM
By Crawdaddy in forum General ClassifiedsReplies: 1Last: 04-04-2007, 08:23 PM
Tags for this Thread