GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5

Thread: Drive Belt

  1. #1

    Default Drive Belt

    So I took the truck to the dealership because I heard a squeaking noise from the engine (especially during a cold start). The truck is just over a year old and only has 12,600 miles on it. The dealership replaced the drive belt (under warranty) stating it was worn and fraying. My question is why would a drive belt with only 12,600 miles on it be worn and fraying??

    Bobby - North Carolina
    2008 4x4 5.3L V8
    6" Suspension Lift and 1.5" Body Lift
    20x9 Ballistic Jesters w/35" Toyo Open Country MT's & 1.5" rear wheel spacers
    4:56 Yukon Gears
    Hypertech Speedometer Calibrator
    Baja style bed mount spare tire carrier
    Flowmaster 40 series dual exhaust
    Recon Smoked LED tails/3rd brake lights/black projectors w/switchback LED's in the corners
    N-Fab Nerf Steps
    K&N CAI
    No Fear Pedals
    Tint, Line-X bedliner, Window visors, Rear wheel well liners
    Painted front grill, bow ties and door badges, de-"lettered" tailgate
    Powder coated front and rear bumpers

  2. #2
    Legend unplugged's Avatar
    Join Date
    Sep 2006
    Location
    High Deserts of SoCal
    Posts
    2,554

    Default Serpentine belt noise

    Sure, your mileage may vary. Typically you want to start checking the belts at 20k miles, but high temps, chemical exposure, and mechanical damage can cause premature belt failure. Dayco recommends replacing serpentine belts that have more than 4 cracks per inch.

    Here is a great video on serpentine belts:
    [ame="http://www.youtube.com/watch?v=vJtiK_pIYsk"]YouTube- DAYCO's "W" PROFILE BELT[/ame]
    There is no way to happiness....happiness is the way.:yipi:
    http://kx6ijq.blu.livefilestore.com/y1pcOFVNH4ix1hjyGUVyXK5LRfef7qSeWzlZDorpQhIEfkZ2ZA  _vXMYypuKMJFw671uF2ZPhjez_j-atRmcjM2zQKpQi1JSsB75/burb1.JPG
    High Desert SoCal
    93 K1500 burb (personal) 350 AT 3" Lift 250K+
    02 Honda Civic LX
    Looking for a 1990's Miata for an engine swap

  3. #3

    Default

    Thanks for the info!

  4. #4

    Default

    they usually will get a dry rib or dry spot in a rib and start making noise

    a good quick fix. take some dialectric grease, about the side you'd put on your toothbrush, and apply to the outside and inside of the belt. as it turns it will spread itself out. If you put to much it will make more noise

    i dought it was fraying, they probably said that for warranty to cover it. but If so, you most likely have a mis-aligned pully
    GM TECH

    05 silverado shortbed

  5. #5

    Default

    Thanks Unpluged, aftyer look at all the skit's I'm still going to do it

Similar Threads

  1. converting 2 whel drive to 4 wheel drive
    By jdaugherty3 in forum GM Powertrain
    Replies: 15
    Last: 11-24-2013, 07:15 AM
  2. seat belt
    By seaotter in forum General Chevy & GM Tech Questions
    Replies: 0
    Last: 06-11-2010, 04:22 PM
  3. A/C Belt jumping around
    By Crazeetxn in forum General Chevy & GM Tech Questions
    Replies: 4
    Last: 05-12-2010, 08:07 AM
  4. Seat belt
    By Bamf in forum General Chevy & GM Tech Questions
    Replies: 5
    Last: 04-21-2010, 10:37 PM
  5. accessory belt comes off
    By 94VERTiGO in forum GM Powertrain
    Replies: 9
    Last: 07-17-2007, 06:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •