Results 1 to 3 of 3
Thread: Rim width Q's
01-30-2010, 01:22 PM #1
- Join Date
- Jan 2010
- Basehor KS
Rim width Q's
Does anyone think a 285/65/18 (32.5" by 11.5") is to small of a width to put on a 10" rim?
IF YOU AINT FIRST, YOUR LAST!
2003 GMC Sierra 1500 Z71
6K HID Lows, Highs, Fogs
3 Piece Billet grille
Autopage Remote Start
3000 Watt Stereo System
Truxedo Bed Cover
3 Inch lift
18" Weld Wheels
01-30-2010, 10:21 PM #2
It's been a while, but, if memory serves, most tire manufacturers "approve" a rim width between 65 and 90% of the tire width. 10/11.5 is about 87%, so it should be just fine (if anything, 10 inches is getting a little wide for those tires).
BTW, if you look up the tire specs on the internet (either from the manufacturer's web-page or a retailer like tirerack), one of those columns is "approved rim widths"'98 K1500 Suburban LS 5.7 L 4L60E NV246 ARB
'92 Ford Explorer XLT 4x4 4.0 L A4LD BW13-54 Trac-loc rear
"My toys were the greasy cogs and springs and pistons that lay around all over the place, and these, I can promise you, were far more fun to play with than most of the plastic rubbish children are given nowadays." Danny in Roald Dahl's Danny The Champion of the World
01-30-2010, 10:39 PM #3
i have 295 70 17s which is a 12 inch wide tire on a 8 inch american racing rim. so ya really you are wider than most with that set up.
By 04-silverado in forum Chevy Silverado Forum (GMC Sierra)Replies: 12Last: 05-19-2010, 06:31 PM
By Z28Johnny in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 12Last: 03-01-2010, 03:23 AM
By jonnywhitehead in forum Chevy Silverado Forum (GMC Sierra)Replies: 3Last: 12-15-2009, 08:02 PM
By GM_Guy in forum The Coffee Shop ~ Chit ChatReplies: 9Last: 07-06-2007, 01:41 PM
Tags for this Thread