Results 1 to 5 of 5
Thread: 1996 Yukon Vibration Problem
01-31-2010, 11:30 AM #1
- Join Date
- Jan 2010
- New York
1996 Yukon Vibration Problem
1996 GMC Yukon SLT 4WD 5.7L Vortec 350
Back Story: Last week my wife was driving the Yukon and the driveshaft dropped from the rear yoke. After having it towed home i found: 1. Driveshaft was removed and unmarked. 2. One broken bolt in the yoke and one loose bolt for the U-Joint strap.
At this point, I have removed the yoke, drilled out broken bolt, reinstalled with same exposed thread count on pinion shaft, replaced both U-Joints in driveshaft and reinstalled, just to get vehicle drivable again.
My current problem is a vibration at 40-50 mph. It seems to be a "lighter/softer" vibration now than when it first started.
Any insight, opinions or help would be appreciated. Thank you in advance
Last edited by YukonJake; 01-31-2010 at 12:24 PM. Reason: more info
By kihd2500 in forum Chevy Silverado Forum (GMC Sierra)Replies: 9Last Post: 11-11-2009, 03:44 PM
By yukonlover89 in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 0Last Post: 06-16-2009, 11:18 AM
By rglickman in forum Chevy Silverado Forum (GMC Sierra)Replies: 5Last Post: 03-01-2007, 06:07 PM
By DaleB in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 2Last Post: 10-09-2005, 12:25 PM
By jenior71 in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 11Last Post: 08-15-2005, 08:45 AM