Results 1 to 3 of 3
Thread: Hub Centric vs Non Hub Centric?
01-31-2010, 03:15 PM #1
Hub Centric vs Non Hub Centric?
Does it make a difference?
I see a lot of wheels come in hub centric and non hub centric versions. I understand that a hub centric wheel has the exact same center bore as the stock wheel and fits exactly but is there a disadvantage to a non hub centric wheel?
So a shim or spacer goes in there on a non hub centric right?
01-31-2010, 03:43 PM #2
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
Hub Centric and Lug Centric are the type wheels your refering to, vehicle manufacturers have a set standard they build to, when purchasing replacement wheels you normally have to purchase wheels conforming to that type, GM's arent as sensitive to this normally though and depending on the wheel type can sometimes use either one.
Toyota's are very bad about this and it's almost impossible to run lug centric wheels on them.
Hub Centric means the wheel is aligned on the axle according to the center point of the axle hub.
Lug Centric means the wheel is aligned on the axle according to the center point of the lugs.
01-31-2010, 06:11 PM #3
I believe with the 2010 GMC Savana I can go with either hub centric or non hub centric.
Well at least when I look for wheels on various websites like tirerack with their wheel fitment guide/ locator both types come up as being able to work.
So is there any difference? Is one type better than another in that situation?
I read some where that if you use a non hub centric wheel you can get vibration.
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 07-14-2010, 12:50 AM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 07-10-2010, 05:50 AM
By kgibson181 in forum Lifted & Offroad SuspensionReplies: 0Last Post: 07-31-2009, 11:57 PM
By Jimbo74 in forum Lifted & Offroad SuspensionReplies: 6Last Post: 05-08-2009, 04:02 PM
By bob13 in forum Lifted & Offroad SuspensionReplies: 12Last Post: 04-29-2009, 09:52 PM
Tags for this Thread