Results 11 to 14 of 14
Thread: HID's are messing up
02-09-2010, 05:00 PM #11
Definitely do something about your auto lights. When you turn the key at night they will turn on and then flash when you start the engine. The flash like that is bad for the ballasts.Michael, 17, CA
2005 Silverado - See my garage for my mod list
02-09-2010, 05:22 PM #12
what do i do to fix it, or how can i change it.
02-09-2010, 07:34 PM #13
on the new style, Im not sure what to do about that, but i have plans to put a switch in to mine to cut out power to the headlights even with the auto lights. I like the automatic lights too much to fully disable them, but it is not good for your ballasts to start the truck with the lights in the automatic mode. When i did my remote start a couple years ago, I found a wire in the bcm under the dash that activated my low beam lights. I figure if i find that wire again, and wire it through a switch that I will put in near my light switch, I can control whether power goes through it, and therefore control whether the auto lights actually turn the headlights on or not.
you may be able to rig up something like that, or there are ways to fully disable the auto lights. also, as others have said, on the 07+, it is pretty much necessary to disable your DRL lights if you want the ballasts to last.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck
03-13-2010, 07:41 PM #14
- Join Date
- Mar 2010
- newtown pa
yo got same truck as u and got the same prob as this guy i just turn the highbeams on. strart it than put my hid low beams back on seams fine
By 04chevtruck in forum Lighting DiscussionReplies: 12Last Post: 03-29-2010, 11:56 AM
By kylegillean in forum Games ForumReplies: 54Last Post: 03-25-2010, 06:41 AM
By x1LSUTigerfan in forum Chevy Truck AccessoriesReplies: 9Last Post: 01-05-2010, 04:30 AM
By Steve in forum Chevy Car ForumReplies: 64Last Post: 11-18-2007, 11:38 PM
By Steve in forum Member IntroductionsReplies: 50Last Post: 11-15-2007, 07:24 PM