Results 1 to 8 of 8
Thread: Tailgate cables
02-08-2010, 10:21 PM #1
- Join Date
- Feb 2010
- Tampa Bay, Florida
Does anyone know what the weight rating is for tailgate cables for full size Chevy trucks? I've read the manufacturer will not rate them due to liability issues. I've also read of cables failing when loading heavy objects such as motorcycles, ATV, and lawn tractors. Is there any after market cables that are stronger than the factory ones? Is there any other way of assuring the cables won't fail during critical loading times? I have thought of fabricating a 2X8 of the proper length from the ground to the tailgate in order to take some of the stress off of the cables. Anyone have any ideas on this?????
02-08-2010, 10:34 PM #2
I dont know what exactly they can handle, but if you are sure to replace them when they start to get old or worn, my stepdad (landscaper) has put a lot of weight on the cables of my 01 silverado, his 05 sierra, and his 06 and 08 ram trucks. This includes sitting the bobcat bucket on, rather than above them, the weight of palettes of paving stones (not the entire palette, but a decent portion of a 3000lb palette of block), quads, and many others. It has been my experience that they can hold a lot of weight as long as you are reasonable about it, with the exception of some 1999-2004 cables (were weak and actually recalled - AND caused the tailgate on my truck to fall on the highway while driving with the tailgate down when BOTH cables broke at once).
2008 FORD F350. My new all-around truck.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread. - Crashed. Will be rebuilt soon.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck -- FOR SALE
02-08-2010, 11:06 PM #3
If you are having questions about loading your toy via the tailgate I would pick up a proper loading ramp set that actually puts the weight on the box instead of the tailgate.Ken Beida
2010 GMC Sierra Crew Cab 4X4, 5.3L
2009 GMC Sierra Denali, 6.2L = 403hp, AWD, Full load
02-09-2010, 12:44 AM #4
I agree. Something that is load bearing should help Those cables are strong. They are right regular lay wire rope. I forget the safe working load equation but I do recall that 1/4" is about 1100 pounds of strength. That is a static (or gradual loading application) dynamic (slamming) load would be greatly reduced for a safe working load.Trevor - Huntington Beach, CA
2007 GMC 2500 4X4
02-09-2010, 12:54 AM #5
I wish GM would have kept the metal link straps that they had on the older trucks... Those were great...
Tim a.k.a. Da' Boulder
2003 Chevrolet Avalanche Z71 - Custom Emergency Response POV
Firefighter, Fire Policeman, Ambulance Driver, Rescue Tech, Emergency Lighting Installer
Tint, 20's, Bull Bar, Intake, Exhaust, Billet Grill, Stereo, Custom Console, Emergency Equipment, and the list goes on...
02-09-2010, 10:11 AM #6
02-09-2010, 05:43 PM #7
02-09-2010, 05:51 PM #8
and bit alot of fingers in the process too!!
By ibmoses in forum Audio, Video & Gadget TechReplies: 13Last: 06-30-2010, 07:19 PM
By XS ive in forum General Chevy & GM Tech QuestionsReplies: 4Last: 06-24-2010, 05:46 PM
By ChevyFan in forum Chevy Parts eBayReplies: 0Last: 10-24-2009, 02:50 PM
By trenchwarfare in forum Audio, Video & Gadget TechReplies: 5Last: 04-10-2008, 12:00 PM
By terry16120 in forum The Coffee Shop ~ Chit ChatReplies: 15Last: 04-21-2006, 07:54 AM
Tags for this Thread