Results 1 to 2 of 2
02-20-2010, 09:07 PM #1
- Join Date
- Feb 2010
95 tahoe 4 wheel drive not working
here's the deal. I just bought this truck and the 4 wheel drive doesn't work. I'm pretty sure I have narrowed it down to the shift actuator. here is whats going on. the drive shaft turns when the truck is shifted into 4 wheel drive. I have 12 volts at my shift actuator and my grounds are good. I took the actuator out and installed a used junk yard actuator and it still doesn't work. I can put the truck in 4 wheel drive and watch the actuator and it does not move. how ever if I apply 12 volts and a ground manually from the battery it does come out slowly. Does anyone know any for sure way to test these actuators? Any ideas? Thanks.........more info... today I bought a new actuator and the 4 wheel drive is still not working. Does anyone know where I can get the 4 wheel drive schematics for this truck?
Last edited by shadetreedad; 02-21-2010 at 03:22 PM. Reason: more info
04-13-2010, 01:21 AM #2
I see this thread is a couple months old, but if you haven't been able to fix the problem you may want to check the vacuum switch on top of the tranfer case.
I know on my S10's its located on the driverside and has three vacuum lines running into the top of it. Once you remove it, you can see it has a ball valve located on the bottom. Sometimes this valve gets rusted and will stick and nolonger perform properly.
I hope this helps. Good luck.99 GMC Sonoma HighRider M5
99 Pontiac Firebird Formula M6
97 S10 Blazer 4x4 A4
By jdaugherty3 in forum GM PowertrainReplies: 15Last: 11-24-2013, 07:15 AM
By 178kchevy in forum General Chevy & GM Tech QuestionsReplies: 2Last: 01-31-2010, 12:28 PM
By Alaskan in forum Chevy Silverado Forum (GMC Sierra)Replies: 14Last: 01-08-2010, 11:30 AM
By emmanuel in forum GM PowertrainReplies: 5Last: 11-29-2009, 08:27 PM
By zorg in forum General Chevy & GM Tech QuestionsReplies: 2Last: 04-23-2008, 03:26 PM
Tags for this Thread