GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default help with rear drive shaft flange

    Hi, I have a 1988 Suburban 4x4 with 3/4 ton axles. The rear pinion seal went out on me. I already got the drive shaft and nut off but the flange will not come off for nothing. I've already snapped a jaw on a 5 ton three jaw puller. Any advice would be greatly appreciated. Thanks in advance.

  2. #2

    Default

    You need a puller that clamps around the flange and then a big C Clamp to keep the puller jaws from sliding off the flange. Those yokes can rust on pretty tight.
    Jim

    2004 SILVERADO 2500HD LS
    Pro Comp Leveling Kit
    285-75-16 Cooper ST All Terrains
    Pro Comp Programmer
    Bilstein Shocks
    Linux Bed Liner
    Tinted Windows



    Other rides:

    1967 Landcruiser <350 Chevy>
    1970 Camaro
    1990 Geo Metro Convertible
    2007 FJ Cruiser

Similar Threads

  1. Front Drive Shaft
    By Minnesota Mudder in forum GM Powertrain
    Replies: 0
    Last Post: 02-14-2010, 11:31 PM
  2. Front drive shaft
    By dsfloyd in forum General Chevy & GM Tech Questions
    Replies: 2
    Last Post: 07-29-2009, 10:09 PM
  3. F.Y.I About Drive Shaft
    By axlman in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 3
    Last Post: 07-17-2009, 07:19 AM
  4. 2wd vs 4wd drive shaft?
    By blueZ71 in forum GM Powertrain
    Replies: 5
    Last Post: 02-27-2009, 06:45 PM
  5. drive shaft
    By Bbad in forum GM Powertrain
    Replies: 0
    Last Post: 01-02-2009, 12:06 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •