GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5

Thread: Headers...

  1. #1
    Jr. Apprentice
    Join Date
    Jun 2009
    Location
    Eastern Shore, MD (WV 4-Life)
    Posts
    15

    Question Headers...

    Does anyone here know of a company that makes titanium/ceramic coated LONG tube headers for an 2002 2500HD 6.0 liter? I have checked eveywhere I can think of and all I can find are the shorties!
    WVU...'NUFF SAID

  2. #2

    Default

    i have been looking at getting some Edelbrock TES headers for my 5.3, they aren't exactly long tube but they aren't shorties either. all the dynos off of them have put up good numbers, around 15-20hp gains. most of what is out there for your 6.0 is shorties from what i've seen. if you get TES or long tubes, there's most likely going to be some cutting/welding required for installation.
    ROTARYENGINEPETE
    '07 GMC SIERRA SLT | Z71 | 4X4 | 5.3L FF

    LIFT:
    ROUGH COUNTRY 3" PREMIUM SUSPENSION LIFT + ADD-A-LEAF
    18" ATX THUG WHEELS
    33" NITTO TRAIL GRAPPLER TIRES
    EBC SPORT ROTORS
    EBC YELLOW STUFF BRAKE PADS
    LIGHTING:
    HELLA/VVME 4300K HID LOW BEAMS

    HELLA BLACK MAGIC OFFROAD LIGHTS
    ANZO USA PROJECTORS HEADLIGHTS
    ANZO USA LED TAIL LIGHTS
    ENGINE:
    K&N 63 SERIES INTAKE
    MAGNAFLOW CATBACK D.O.S.I.F.T. EXHAUST
    BULLYDOG TRIPLE DOG GT TUNER

    PULSTAR IGNITORS
    OPTIMA RED TOP
    DRIVETRAIN:
    YUKON 4.56 GEARS
    MAG-HYTEC DIFF COVER
    CORVETTE SERVO
    TRANSGO SHIFT KIT
    Z-PACK 3-4 CLUTCH
    REBUILT WARN XFER CASE
    BODY:
    RUNCOOL HOOD LOUVERS
    FULL WEATHERTECH VISORS/BUGSHIELDS
    DUPONT BEDLINER

    DEEZEE BLACK DIAMOND PLATE BED CAPS
    BULLDOG LOCKING SPORT FUEL DOOR
    DOOR MOLDINGS REMOVED
    CUSTOM WIRE MESH GRILL
    BUSHWACKER BOSS FENDER FLARES
    CB THRU GLASS RADIO ANTENNA

    5.5sec 0-60mph on pavement (5.2sec running E85), and a little less in 3 feet of muddy water

  3. #3
    Jr. Apprentice
    Join Date
    Jun 2009
    Location
    Eastern Shore, MD (WV 4-Life)
    Posts
    15

    Default

    yeah i looked at the edelbrock headers. i believe that is what i'm going to have to get. the long tube headers offer the most torque/hp though....thanks for the info! do you like the edelbrock's?
    WVU...'NUFF SAID

  4. #4

    Cool Headers

    Check out American Racing Headers, Stainless Works, Dynatech and Kook headers. They all make good long tube headers.

  5. #5
    Jr. Apprentice
    Join Date
    Jun 2009
    Location
    Eastern Shore, MD (WV 4-Life)
    Posts
    15

    Thumbs up

    Quote Originally Posted by silveradotrailblazer View Post
    Check out American Racing Headers, Stainless Works, Dynatech and Kook headers. They all make good long tube headers.


    Thanks for the heads up!!! I've heard of Dynatech but not the others. I will definately check them out! I knew you guys would know where to look! Thanks again, you guys ROCK!!

    WVU...'NUFF SAID

Similar Threads

  1. Shorty Headers vs Long Tube Headers
    By rackchaser71 in forum Performance & Fuel
    Replies: 5
    Last Post: 06-18-2011, 12:13 AM
  2. headers
    By Bbad in forum Performance & Fuel
    Replies: 0
    Last Post: 09-08-2009, 02:15 PM
  3. Headers
    By z7177 in forum Chevy Truck Accessories
    Replies: 5
    Last Post: 05-10-2009, 10:17 PM
  4. Headers????
    By chevyman5.3L in forum Chevy Truck Accessories
    Replies: 5
    Last Post: 12-06-2008, 01:07 PM
  5. headers
    By Bbad in forum Performance & Fuel
    Replies: 2
    Last Post: 11-09-2008, 09:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •