GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 158 of 239 FirstFirst ... 58108148156157158159160168208 ... Last Post byLast Post by
Results 1,571 to 1,580 of 2390
  1. #1571

    Default

    I ordered a pair of pneumatic manifolds for my OBA project, today. I also commenced my fitting research so that I can begin planning my fitting order.

  2. #1572

    Default

    The:


    • ACDelco D6003A Switch Assembly
    • ACDelco D7090C Switch Assembly



    Arrived today so they will be getting installed when I get home.

  3. #1573

    Default

    Washed the mud off from this past weekend.... Checked and filled the air in the tires.
    2009 Chevy Silverado 2500HDLT 6.0L w/ Towing Package, Dick Cepek GM8 Rims, Dick Cepek FC II 33X11.50R17,RKSport Ram-Air Hood(Functional), Lazer Lite Aluminum Tonneau Cover, Road Armor Stealth Bumper, PIAA Lighting, Diablo Trinity Tuner, Diablew Custom Tune, BullyDog Cold Air Intake, American Racing Headers w/highflow cats, Corsa Performance Sport Exhaust, Custom Striping, Black Bowties front and rear, Fuel Grille Inserts, Recon Headlights, Readylift Shocks, Readylift Upper Contol Arms, 2" Blocks in the Rear..

    Future Plans: HD Tie Rods, Under hood upgrades, Crower Camshaft and possibly electric fans.

  4. #1574

    Default

    swapped my speaker amp today
    went from ALPINE MRP-F300 to
    MRX-F65 definitely liking the difference so far


    Click image for larger version. 

Name:	photo.jpg 
Views:	97 
Size:	36.9 KB 
ID:	44529
    2000 Chevrolet Silverado

    Powertrain:
    4.3L V6, 4L60E, 2WD, Single Cab
    Performance:
    Airaid CAI
    Poweraid TB Spacer
    Flowmaster 10-series exhaust (dumped)
    BLACKBEAR TUNED!!!
    Edge CS insight monitor
    4.10 gears
    Limited-slip differential
    LS-1 Dual Electric fans
    Corvette tranny servo swap

    Audio:
    Head Unit: Alpine
    Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
    Subs: 2-12" Kicker CVT's
    Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)


    Tires/Wheels:
    305/70R16 NITTO Terra Grapplers
    16" PROCOMP 7089's
    Suspension:
    2" leveling kit
    3" Fabtech Spindle Lift Kit
    Front/Rear-Bilstein 5100 shocks

    Lighting:
    FRONT
    35W HID Low Beams
    RECON LED smoked roof cab lights
    REAR
    HELLA LED taillights and 3rd brakelight
    HELLA FF-75 Aux. Reverse Lamps
    RIGID dually D2, flush mount, wide beam
    Accessories:
    Hawk HPS Brake pads
    Russell braided steel brake lines
    Powerstop-red powdercoated brake calipers
    Powerslot Cryo brake rotors
    EGR in-channel window visors

  5. #1575

    Default

    I diagrammed the component connections of my OBA installation in Visio, today. I also picked up a pair of 2.5 gallon 200psi air tanks, a load genie unloader (with check valve), a tube bender, and a bunch of fittings and plugs for the project. Sadly, there's still a pile of stuff I need to research and get. On the plus side I'm learning quite a bit about compressed air plumbing, gauges, and fittings.

  6. #1576

    Default

    Ordered new 17" rims with 285/75R17's and a 2" level kit. Can't wait.
    Sometimes the best part of my job is that my chair swivels.


  7. #1577

    Default

    Quote Originally Posted by lonelywolf858 View Post
    Ordered new 17" rims with 285/75R17's and a 2" level kit. Can't wait.
    PICS!!!!!!!!!

    Alex


    2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic / 2004 Chevy Impala LS 3.8 Cappuccino

    Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Airaid MIT - Tekonsha P2 - ARS Billet Grill - Fia custom fit seat covers

  8. #1578

    Default

    Order a rustproofing gun and rustproofing product from eastwoods today... Enough to do three vehicles.

  9. #1579

    Default

    Quote Originally Posted by Sierraowner5.3 View Post
    PICS!!!!!!!!!

    Alex
    Pics will be posted once it is all mounted.

  10. #1580

    Default

    This afternoon I dragged the trailer out to pick up a 2011 Kawasaki Mule 610 CX. Once we got it home and unloaded I parked and disconnected the trailer. Next I commenced construction of a wood prototype for a metal shelf that I intend to have fabricated to hold and protect a pair of 2.5 gallon 200psi air tanks. The prototype's primary panel and supports are done, but there's still more work to do on the prototype.

Similar Threads

  1. I Seafoamed my truck today.
    By ZSI52 in forum General Chevy & GM Tech Questions
    Replies: 47
    Last: 09-03-2012, 01:32 PM
  2. Put the truck in the ditch today
    By pmf608 in forum Chevy Truck Talk & GM News
    Replies: 21
    Last: 07-25-2012, 10:53 AM
  3. Truck died twice today...
    By texas99lb in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 10
    Last: 01-06-2010, 01:13 AM
  4. Truck in the shop today...
    By Delmarva in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 0
    Last: 11-11-2009, 11:39 AM
  5. truck over reved today?
    By etpn13 in forum GM Powertrain
    Replies: 2
    Last: 04-22-2009, 02:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •