GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 162 of 239 FirstFirst ... 62112152160161162163164172212 ... LastLast
Results 1,611 to 1,620 of 2390
  1. #1611

    Default

    @SurrealOne Did you just get the material or did it come cut like the guy says he does. Also what are the decal options because that looks really awesome.

    1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
    Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.

    Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door

  2. #1612

    Default

    As I understand it there are pre-cut options for OEM hoods. Since my hood is not OEM I bought a 6ft x 4ft panel of the material after taking some measurements and made my own liner. You should call Gonzalo ("Gonzo") rather than email him as he seems to be more responsive to calls. Ask him about decal options if you have something in mind. That's what I did ... and he happened to have the decal I wanted.

  3. #1613

    Default

    Quote Originally Posted by SurrealOne View Post
    Today I:

    • Removed my hood
    • Scuffed the underside of the hood with a scotch brite pad
    • Cleaned the freshly-scuffed underside of the hood with degreaser
    • Created a fabric pattern of the underside of the hood out of a sheet
    • Used that pattern to cut a 6ft x 4ft piece of aircraft firewall material (from www.hoodliners.net) to fit my hood
    • Used 3M #80 spray adhesive to apply the material to the hood
    • Cut an opening for the port to hood's cowl
    • Removed overspray with Goo Gone Extreme
    • Applied an autobot decal
    • Used a heat gun to set the decal since the application was in three dimensions and the material to which it had to adhere was not solid
    • Reinstalled my hood
    • Found myself a bit surprised that this took all day


    Here's a photo of the finished product just prior to hood reinstallation:
    Attachment 44970
    That looks great. As usual, good job
    David
    2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
    http://www.gmtruckclub.com/forum/sho...Silverado-2500
    1960 Land Rover Series II 88
    2001 Pontiac Sunfire
    2013 Toyota Avalon Limited (Wife's Car)
    NRA Life Member

  4. #1614

    Default

    You do nice work @SurrealOne

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  5. #1615

    Default

    Ok @SurrealOne, I'll call him I was looking for the tahoe logo like it looks like on the moulding, a chevy bowtie and maybe Gm truck or Chevrolet all caps in 90's style.

    1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
    Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.

    Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door

  6. #1616

    Default

    Today I ordered the following for my OBA project: rotolock fittings, an intake filter, an OEM York dipstick, an oil return kit, two 1/4" MPT universal couplers, and 2 rubber covers for those universal covers. I think that about does it for parts. (Finally!)

    Now I need to figure out what kind of rigid tubing to use and how much of it I'll need. I also need to find a place that makes flexible metal hose to specification, as I need it for three different locations in the project.

  7. #1617

    Default

    got home from a field exercise today, and installed the 87 octane tune from a diablo intune on my truck. super happy with it so far the little bit I have driven it since the install.

    Alex


    2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic / 2004 Chevy Impala LS 3.8 Cappuccino

    Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Airaid MIT - Tekonsha P2 - ARS Billet Grill - Fia custom fit seat covers

  8. #1618

    Default

    Cleaned my floor mats yesterday with some Zep's Citrus Degreaser. They needed it!
    Clint (TX) 2001 Silverado LS 4.8L auto 2wd ECSB [GARAGE]
    Gasoline or gunpowder: If you ain't burning one, you ain't having fun!
    NRA Endowment Member 5 24 48 88 - Hendrick Motorsports FTW!

  9. #1619

    Default

    Readied my truck for winter... Installed the stock old geazer tires... And rust proofed the underside.
    2009 Chevy Silverado 2500HDLT 6.0L w/ Towing Package, Dick Cepek GM8 Rims, Dick Cepek FC II 33X11.50R17,RKSport Ram-Air Hood(Functional), Lazer Lite Aluminum Tonneau Cover, Road Armor Stealth Bumper, PIAA Lighting, Diablo Trinity Tuner, Diablew Custom Tune, BullyDog Cold Air Intake, American Racing Headers w/highflow cats, Corsa Performance Sport Exhaust, Custom Striping, Black Bowties front and rear, Fuel Grille Inserts, Recon Headlights, Readylift Shocks, Readylift Upper Contol Arms, 2" Blocks in the Rear..

    Future Plans: HD Tie Rods, Under hood upgrades, Crower Camshaft and possibly electric fans.

  10. #1620

    Default

    Quote Originally Posted by TimTom64b View Post
    rust proofed the underside.
    What do you use for that and how do you go about it? Just curious...

Similar Threads

  1. I Seafoamed my truck today.
    By ZSI52 in forum General Chevy & GM Tech Questions
    Replies: 47
    Last Post: 09-03-2012, 01:32 PM
  2. Put the truck in the ditch today
    By pmf608 in forum Chevy Truck Talk & News
    Replies: 21
    Last Post: 07-25-2012, 10:53 AM
  3. Truck died twice today...
    By texas99lb in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 10
    Last Post: 01-06-2010, 01:13 AM
  4. Truck in the shop today...
    By Delmarva in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 0
    Last Post: 11-11-2009, 11:39 AM
  5. truck over reved today?
    By etpn13 in forum GM Powertrain
    Replies: 2
    Last Post: 04-22-2009, 02:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •