Results 1,681 to 1,690 of 2390
11-22-2012, 03:11 PM #1681
I replaced my backup camera yesterday since the crack in the lens caused the first one to get water damaged. It's nice to be able to see the small cars that can hide behind my truck again.
I've also been working on building a set of projector fog lights. I picked up a pair of fog light projectors from a 1997 Audi A6 for $6 at the junkyard, put some 100W H3 bulbs in them and now I'm mounting them into my factory fog lights. They're really bright, won't glare other drivers and put out a really nice useful beam pattern. The first one is almost done. I'll post pictures soon.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck
11-24-2012, 01:25 AM #1682
pulled my ranch hand grill guard off and my lower valance, trying to motivate myself to start my prerunner bumper project2000 Chevrolet Silverado
4.3L V6, 4L60E, 2WD, Single Cab
Poweraid TB Spacer
Flowmaster 10-series exhaust (dumped)
Edge CS insight monitor
LS-1 Dual Electric fans
Corvette tranny servo swap
Head Unit: Alpine
Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
Subs: 2-12" Kicker CVT's
Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)
305/70R16 NITTO Terra Grapplers
16" PROCOMP 7089's
2" leveling kit
3" Fabtech Spindle Lift Kit
Front/Rear-Bilstein 5100 shocks
35W HID Low Beams
RECON LED smoked roof cab lights
HELLA LED taillights and 3rd brakelight
HELLA FF-75 Aux. Reverse Lamps
RIGID dually D2, flush mount, wide beam
Hawk HPS Brake pads
Russell braided steel brake lines
Powerstop-red powdercoated brake calipers
Powerslot Cryo brake rotors
EGR in-channel window visors
11-24-2012, 11:49 PM #1683
I ordered the following lighting accessories, today:
* Rigid Dually D2 Flush Mount LEDs (set of two - wide beam pattern)
* Rigid 10" SR-Series Specter LED Light bar (set of two - 5100 lumen driving pattern)
11-26-2012, 10:37 AM #1684
- Join Date
- Nov 2012
- Akron, Co
I got a little crazy on some beautification projects on Saturday, Took off some ugly door molding that was rusted and made my truck ugly, taking the adhesive off was terrible but way worth it. Then i took off all the pinstriping on the side and dealer decal on the tailgate. Took out my grill assembly and taped off the chrome and painted parts and painted the grill itself gloss black and made it look awesome. Needless to say my '04 silverado is a sleek shiny beauty now.
11-26-2012, 12:23 PM #1685
Here's a teaser picture of my fog light project. I should have the first one pretty much done today if all goes well. I'll post more about this project once I have them both done.
11-27-2012, 11:47 PM #1686
Started testing my replacement under hood light setup......
Here is a picture of the "junk" that GM used...... You can buy these at the dealer for $120
This is the direction I am taking:
In that picture I am just making sure that the lights will actually work and it sure looks like they do If I use the complete reel of LED's I will be sitting at around 5100 lumens, which is more than halogen high beams which are about 2500-3000 lumens or just under 3 x 100 watt incandescent blubs or 3 x 26 watt daylight compact fluorescent bulbs.
Reel of LED's $35. On/Off Switch.... $5.95.... Heat shrink tube (if I end up using it) $2, Factory quick connect pigtail... I got mine free.
Last edited by PantheraUncia; 11-28-2012 at 12:32 AM.
11-28-2012, 01:00 AM #1687
Wow, that should look pretty sweet when you finish it. Be sure to post some pics. I would love to do that to my truck, but there is no factory under hood light. I guess that I could just wire the entire thing. Where did you get the reel of LEDs?
- - - Updated - - -
Last edited by Pikey; 11-28-2012 at 10:34 AM.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
11-28-2012, 08:50 AM #1688
I ordered directly from http://www.hitlights.com/. I found them on Amazon first, but they did not have all the "individual" parts I was looking for as I am going to be ordering some RGB reels also.
I went with the "High Density" (300 LED's) on a 16.4ft reel in 6000k daylight with IP65 waterproof/water resistant housing.
LS5050_CW300_WP Flexible LED Light Strip - SMD 5050 - Cool White - Weatherproof (IP 65) and High Density 1 5050CONNTW LED Strip-to-Strip Connector - SMD 5050 And SMD 3528 (3-Color) - Any Angle - 4 pack
It looks like they also carry some that are IP68 which can be used in swimming pools, hot tubs, etc.
I think the photo I posted shows them a little brighter than they actually are, but they are bright and they do work.
In 2000, the trucks came with under hood lights s my wiring was already there. I did a line mans splice and put a 9005 headlight quick connect on it after removing the factory hood light that stopped working. and then took the other end of the quick connect and line man spliced it into the led strip.
I should have time this weekend to start and finish the project, I will be taking pics along the way and posting a guide.
Last edited by PantheraUncia; 11-28-2012 at 10:23 AM.
11-28-2012, 01:28 PM #1689
When you finish would you mind posting some details about the project? I am interested in doing the same to mine, I have no idea where to start. My fogs only use tiny 880 bulbs[/QUOTE]
I'll do that. I have the first one almost done, and the second one shouldn't take nearly as long now that I'm familiar with it. The projectors I used have tiny little h3 bulbs but the 100W H3 bulbs I'm using only cost $6 each and put out a lot of light. And its all focused on the road, not all over the place.
**For getting a general idea of how to do projector retrofits, go check out the hidplanet.com forum. Its a forum dedicated to people who do lighting projects, and most of them are installing HID projectors in normal headlights so they can have HIDs with no glare.
11-29-2012, 11:45 AM #1690
- Join Date
- Nov 2012
- Petal, MS
Got the bad purge valve replaced by the dealer. Glad to see that CEL gone!!Josh
2009 Chevrolet Silverado LTZ 4x4
By ZSI52 in forum General Chevy & GM Tech QuestionsReplies: 47Last Post: 09-03-2012, 02:32 PM
By pmf608 in forum Chevy Truck TalkReplies: 21Last Post: 07-25-2012, 11:53 AM
By texas99lb in forum Chevy Silverado Forum (GMC Sierra)Replies: 10Last Post: 01-06-2010, 02:13 AM
By Delmarva in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 11-11-2009, 12:39 PM
By etpn13 in forum GM PowertrainReplies: 2Last Post: 04-22-2009, 03:45 PM