GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 175 of 239 FirstFirst ... 75125165173174175176177185225 ... LastLast
Results 1,741 to 1,750 of 2390
  1. #1741

    Default Pissed me off.

    The other day I painted my Chevy BowTie black and waited until today to put it on. I went to Wal-Mart for around an hour to do some last minute shopping for food before Christmas. I get done shopping and see my truck and someone must have liked my BowTie so much that they decided they had to have. I couldn't believe it.

    I guess thats what I get for always backing my truck into parking spots instead of just pulling into them. Am I the only one that does that? I do it so it's easier to spot my truck.


    Here is a picture of what was my BowTie after I painted it.
    Click image for larger version. 

Name:	011.jpg 
Views:	57 
Size:	62.2 KB 
ID:	47198

    They keep saying the right person will come. I think mine is my truck.

    "No offense" means "I'm about to insult you,but don't get mad."

  2. #1742

    Default

    Nice work, BlackSmoke*. It's completely lame that someone swiped it.

  3. #1743

    Default

    Well currently I reek of old antifreeze but the radiator is out and engines is flushed now just need to install the new radiator and refill.

    - - - Updated - - -

    Well I finished the work and now no more leaks. Installed new radiator, upper hose, lower hose and thermostat. Then I refilled with Dex-cool. Finished by letting her idle for about 20 mins while I cleaned up the spills from missing the drain pans. Overall a great day.

    1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
    Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.

    Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door

  4. #1744

    Default

    I removed the OEM front license plate holder and replaced it with an aftermarket plate holder after modifying it to bolt to the OEM location. The purpose of this was to drop the front license plate down about one inch so that the twin slots in the bumper are not obscured by the front plate, as I plan to install my LED light bars in those slots.

  5. #1745

    Default

    Scarred up one of my rims today! Trying to get around a Christmas shopper! Don't go out today, its a nightmare! (it's raining is So Cal)

  6. #1746

    Default

    Got my purty white truck FILTHY driving out in the nice wintry rain here in Ohio. Gotta love it...

    When it dries up I gotta give my baby a bath and I will be installing a Denali grille and Black Halo's.. will post up pics in my trucks album when its done!
    09 Sierra SLT
    - Denali grille, black HALO headlights, smoked tails & brake light, 20% tint, Carbon fiber interior
    - Top Gun Customz 2.5" leveling kit, 305/55/20 Toyo Open Country AT's on GMC 20's
    - K&N 77 series cold air intake, Flowmaster super 10 series exhaust
    Next up: Smoked fog lights


    2000 Silverado Z71
    - 4" body lift, 315/65/16 Mastercraft Courser AT2 tires
    - Stainless steel Excalibur catback exhaust
    - Lots more to come!

  7. #1747

    Default

    I installed my new Sylvania Silverstar Ultra headlights. Man are they bright. Also restored my headlight housings, park lights and tail lights.

    1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
    Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.

    Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door

  8. #1748

    Default

    This Christmas day I completed the back-end wiring on the environmentally sealed relay block that I have been working on. All she needs now are properly sized (for each application) fuses (5), a positive connection to the +12v stud, a negative connection, and she'll be good to go for 5 relay-based accessories that will draw off the aux battery. (I have 3 in the immediate future: rear LED work lights, front LED light bars (2), and the York compressor clutch.)


    Back Side - back-end wiring complete, +12v stud unconnected:
    Click image for larger version. 

Name:	2012-12-25_19-01-13_822.jpg 
Views:	63 
Size:	91.6 KB 
ID:	47312


    Front side - closed:
    Click image for larger version. 

Name:	2012-12-25_19-02-19_970.jpg 
Views:	68 
Size:	75.1 KB 
ID:	47313

    Front side - open, no fuses installed:
    Click image for larger version. 

Name:	2012-12-25_19-02-53_704.jpg 
Views:	62 
Size:	77.6 KB 
ID:	47314

  9. #1749

    Default

    Scraped off a couple of inches of snow/ice so I won't have to do it in the morning.
    Clint (TX) 2001 Silverado LS 4.8L auto 2wd ECSB [GARAGE]
    Gasoline or gunpowder: If you ain't burning one, you ain't having fun!
    NRA Endowment Member 5 24 48 88 - Hendrick Motorsports FTW!

  10. #1750

    Default

    Quote Originally Posted by SurrealOne View Post
    This Christmas day I completed the back-end wiring on the environmentally sealed relay block that I have been working on. All she needs now are properly sized (for each application) fuses (5), a positive connection to the +12v stud, a negative connection, and she'll be good to go for 5 relay-based accessories that will draw off the aux battery. (I have 3 in the immediate future: rear LED work lights, front LED light bars (2), and the York compressor clutch.)


    Back Side - back-end wiring complete, +12v stud unconnected:
    Click image for larger version. 

Name:	2012-12-25_19-01-13_822.jpg 
Views:	63 
Size:	91.6 KB 
ID:	47312


    Front side - closed:
    Click image for larger version. 

Name:	2012-12-25_19-02-19_970.jpg 
Views:	68 
Size:	75.1 KB 
ID:	47313

    Front side - open, no fuses installed:
    Click image for larger version. 

Name:	2012-12-25_19-02-53_704.jpg 
Views:	62 
Size:	77.6 KB 
ID:	47314
    That's a really nice looking relay block you've got there. I need to get my relay block done up here soon so that I can get my LED off road light behind my grille working and have relays ready for other accessories.

    I did some work on retrofitting the projector into my second fog light. I should hopefully be able to get this one finished up tomorrow and get them aimed so that they're ready to head out skiing the day after. Pictures to come once this one is done and they're both on the truck.

    2001 Silverado Reg. Cab Not-So-Base -- SOLD
    2003 Avalanche Z71. No Cladding. Check out my Mod thread.
    1974 Triumph Spitfire 1500 - Work in Progress
    2003 Sierra 3500 Duramax. The Newer, Better Work Truck


Similar Threads

  1. I Seafoamed my truck today.
    By ZSI52 in forum General Chevy & GM Tech Questions
    Replies: 47
    Last Post: 09-03-2012, 01:32 PM
  2. Put the truck in the ditch today
    By pmf608 in forum Chevy Truck Talk & News
    Replies: 21
    Last Post: 07-25-2012, 10:53 AM
  3. Truck died twice today...
    By texas99lb in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 10
    Last Post: 01-06-2010, 01:13 AM
  4. Truck in the shop today...
    By Delmarva in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 0
    Last Post: 11-11-2009, 11:39 AM
  5. truck over reved today?
    By etpn13 in forum GM Powertrain
    Replies: 2
    Last Post: 04-22-2009, 02:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •