Results 1,801 to 1,810 of 2390
01-14-2013, 09:10 PM #1801
Put my truck at the hands of my girlfriend. This should go well.
If at first you don't succeed, chances are, you are using too small of a cheater bar
1999 GMC Sierra SLT Z71 | 5.3 Vortec | Spectre Cold Air Intake | TransDapt TBS | Hypertech 30005 Tune | 2005 Chevy Tails | Denali headlights | AWS Bug Shield | 265/75/16 Mastercraft Courser A/T | "Ghetto" painted tailgate | Boss HD Speakers | 2005 Overhead Console | Dual Thrush Turbo Mufflers
Bigger Amp Alternator | Electric Fans | Oil/Trans Fluid cooler | Re-done exhaust | Paint | Interior Restoration/upgrade with newer model stuff | Window Visors (In channel) | Tint | Low-Profile Tool Box | LEDs throughout stock cab locations | And whatever is spurr of the moment
US Navy Sailor :sign0011:
01-14-2013, 10:16 PM #1802
01-14-2013, 10:37 PM #1803
01-15-2013, 02:39 AM #1804
01-15-2013, 12:47 PM #1805
I applied my "mid-winter" coat of wax while parked in the garage. Wax takes forever to set up when it is cold. It is 41 in my garage and 17 outside. Instead of doing one panel at a time I was able to do the entire truck, then the first section I did was set up. A 20 minute job to wax the entire Yukon XL is not bad. Have to work fast around here, you never know how long the little one is going to nap.
Last edited by Pikey; 01-15-2013 at 01:01 PM.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
01-15-2013, 01:36 PM #1806
01-15-2013, 01:53 PM #1807
01-15-2013, 02:31 PM #1808
01-15-2013, 03:44 PM #1809
Picked up my new oil cooler lines for my '89 Burb yesterday. Should have changed them when I swapped the engine out this summer and put almost everything else in the engine bay new again. But now I have old lines creating a leak on the driveway! All that work and my own stupidity leaves me having to put new lines on in sub zero weather now! lol I'm hoping for 40 degree weather in a few days to actually put them on.
01-16-2013, 12:35 AM #1810
Ordered the wall bracket for my coalescing filter for use in frabricating a mounting bracket for it in the engine compartment.
- - - Updated - - -
I also met up with Nakranij and took measurements under his full-size overhead console so that I'll know where to cut my headliner when installing a full size overhead console. We also did some experimentation to determine if 'd need to swap the map lights ... and it appears that I will have to do so if the fleabay'd overhead console I bought is a 2-wire system. I liked Nak's Putco LED map lights better than my own (brighter and they function better) so I ordered a set when I got home.
By ZSI52 in forum General Chevy & GM Tech QuestionsReplies: 47Last Post: 09-03-2012, 02:32 PM
By pmf608 in forum Chevy Truck TalkReplies: 21Last Post: 07-25-2012, 11:53 AM
By texas99lb in forum Chevy Silverado Forum (GMC Sierra)Replies: 10Last Post: 01-06-2010, 02:13 AM
By Delmarva in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 11-11-2009, 12:39 PM
By etpn13 in forum GM PowertrainReplies: 2Last Post: 04-22-2009, 03:45 PM