Results 2,121 to 2,130 of 2390
04-09-2013, 08:46 PM #2121
Took my Pollen Green truck out to pick up some building supplies.
2011 GMC Sierra SLE - 5.3 - 4X4 - Z71 - King Shock Level Kit - Body Color GMC grill emblem - 2 Tone Engine Cover, Rad Cover and Battery Box - Volant CAI - Tru Cool 40K tranny cooler - Sylvania ZXE bulbs Hi/Low -TriFold Hard Tonneau Cover- CoverCraft Seat Covers - Diablo inTune - GoRecon LED under rail lights - GoRecon LED White Lightning Tailgate Light Bar - Windows tinted to 45%- Kenwood DNX6990 - JL Audio C5-650 &650X- JL Audio Amp- Interco Truxus M/T 33x12.50x18
04-09-2013, 08:56 PM #2122
@aloxdaddy99 mine's Pollen Green/Yellow, too!
I met with the engineer and machinist doing fab work for me for round #2 on the front air manifold bracket design. (Don't ask, long story. There was NOTHING wrong with the first one but it's not usable.)
04-09-2013, 10:31 PM #2123
- Join Date
- Apr 2012
- Hickory, NC
Got off work and hulled 50 40lb bags of mulch. Yanked out some stumps and did some landscaping.2007 Chevy Silverado 1500 Crew Cab VortecMax 6.0L
Superchips power programmer, Fabtec 2 inch leveling kit, Flowmaster 40 series exhaust, K & N cold air intake, 3.73 gears, chrome mirror covers, Raptor Nerf bars, black emblems, black painted grill, chrome bull bar, LED tailgate light bar, Line-X, diamond plate toolbox, stainless 3rd brake light cover
future- Fabtec 5 inch lift and 35 inch Toyo MT with 20 inch KMC XD Series Hoss Chrome
04-10-2013, 04:50 PM #2124
Installed a CURT Trailer Brake Controller last weekend. Went very smooth with the appropriate harness. Haven't had the trailer on to test it yet, maybe this weekend.
2012 Silverado 1500 LS Crew Cab 4.8L 4x4
- Nitto Tera Grapler 265/70R17, Line-X bed liner, Black Bowties, Stampede front deflector, DeeZee black diamond plate bed rails, TonnoPro Lo-roll cover, Antenna deleted, Spyder Projection Headlights with Phillips CrystalVision Ultra bulbs, Spyder Tail Lights & 3rd Brake Light, Rough Country leveling kit, PlastiDip'd emblems, and wheel hubs, Diablosport Trinity, 20% tint, Black OEM grill
"Coming through in a new Chevy, droppin' game like it's too heavy."
04-10-2013, 05:17 PM #2125
finished removing all the residue from my truck where the door mouldings were2000 Chevrolet Silverado
4.3L V6, 4L60E, 2WD, Single Cab
Poweraid TB Spacer
Flowmaster 10-series exhaust (dumped)
Edge CS insight monitor
LS-1 Dual Electric fans
Corvette tranny servo swap
Head Unit: Alpine
Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
Subs: 2-12" Kicker CVT's
Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)
305/70R16 NITTO Terra Grapplers
16" PROCOMP 7089's
2" leveling kit
3" Fabtech Spindle Lift Kit
Front/Rear-Bilstein 5100 shocks
35W HID Low Beams
RECON LED smoked roof cab lights
HELLA LED taillights and 3rd brakelight
HELLA FF-75 Aux. Reverse Lamps
RIGID dually D2, flush mount, wide beam
Hawk HPS Brake pads
Russell braided steel brake lines
Powerstop-red powdercoated brake calipers
Powerslot Cryo brake rotors
EGR in-channel window visors
04-11-2013, 07:01 AM #2126
- Join Date
- Dec 2011
- Blog Entries
Yesterday I washed the truck both the body and the undercarriage. Then I checked all vitals and topped them off. Also cleaned lights.
1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.
Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door
04-11-2013, 07:11 AM #2127
2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic / 2004 Chevy Impala LS 3.8 Cappuccino
Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Airaid MIT - Tekonsha P2 - ARS Billet Grill - Fia custom fit seat covers
04-11-2013, 07:32 AM #2128
- Join Date
- Mar 2013
- Currently living in Medford, Oregon. Was raised in Athens, Georgia
had my windows tented2008 6.2L GMC Sierra Denail
04-11-2013, 10:24 AM #2129
Yesterday I started cleaning up my summer wheels to get them ready for once the weather is nice enough to put them back on. Today I will be going to finish cleaning them up.
Here's a picture of my project from last week. I mounted both fuel filter heads to the flatbed frame, ran 1/2" fuel hose with compression fittings to tap into the factory fuel line, and put ball valves on the inlet and outlet side of the filter setup so that I don't spill too much diesel when I change the filters out. Prefilter is a Napa Fuel/Water separator and the secondary filter is a CAT filter that is rated for 2 microns absolute which is a lot better for my injectors than the factory fuel filter.
2008 FORD F350. My new all-around truck.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread. - Crashed. Will be rebuilt soon.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck -- FOR SALE
04-12-2013, 10:45 AM #2130
I finished cleaning my summer wheels and got them mounted on my truck. It might still be a bit early here, but we should pretty much be done with the snow and ice now so it should be fine.
By ZSI52 in forum General Chevy & GM Tech QuestionsReplies: 47Last: 09-03-2012, 01:32 PM
By pmf608 in forum Chevy Truck Talk & GM NewsReplies: 21Last: 07-25-2012, 10:53 AM
By texas99lb in forum Chevy Silverado Forum (GMC Sierra)Replies: 10Last: 01-06-2010, 01:13 AM
By Delmarva in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last: 11-11-2009, 11:39 AM
By etpn13 in forum GM PowertrainReplies: 2Last: 04-22-2009, 02:45 PM
Tags for this Thread