Results 591 to 600 of 2390
03-15-2012, 03:02 AM #591
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck
03-15-2012, 07:27 AM #592
Hooked a boat up to her and about to head out to relieve some of this week and months stress
If at first you don't succeed, chances are, you are using too small of a cheater bar
1999 GMC Sierra SLT Z71 | 5.3 Vortec | Spectre Cold Air Intake | TransDapt TBS | Hypertech 30005 Tune | 2005 Chevy Tails | Denali headlights | AWS Bug Shield | 265/75/16 Mastercraft Courser A/T | "Ghetto" painted tailgate | Boss HD Speakers | 2005 Overhead Console | Dual Thrush Turbo Mufflers
Bigger Amp Alternator | Electric Fans | Oil/Trans Fluid cooler | Re-done exhaust | Paint | Interior Restoration/upgrade with newer model stuff | Window Visors (In channel) | Tint | Low-Profile Tool Box | LEDs throughout stock cab locations | And whatever is spurr of the moment
US Navy Sailor :sign0011:
03-15-2012, 08:02 AM #593
- Join Date
- Feb 2011
- Nova Scotia, Canada
I installed two rear Calipers on my truck, because they were seized solid. $80 each at Canadian Tire.__________________________________________________ __________________________________________________ ____
99 Gmc Sierra 4X4 Reg Cab SL
- 6000k HID Low beam headlights
- 3 inch rear lift
2005 Honda Civic LX-G 4DR
03-15-2012, 08:03 AM #594
- Join Date
- Mar 2006
- Cameron, NC
- Blog Entries
The '95 is going in to have the back window re-tinted today. Apparently, the tint shop didn't bother to clean the glass before installing the film. There is a bunch of crud between the glass and film, which worked out well because the tint is really too dark for me at 5% anyway. I think I am going to go with 20% so I can see through it!"It went together didn't it? Well then there has to be a way to take it apart!" - Me.
Check out my image gallery here
"The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)
03-15-2012, 08:22 PM #595
gave it a good bath, and removed the SLT badges from the cab corners. The one on the drivers side was already peeling, so I just pulled it off the rest of the way, and removed the passanger side as well. scrubbed the areas real good, and you cant tell there used to be something there.
also started prepping the other three rims for paint, sanded them, and started taping areas off.
pics to follow on that topic later.
2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic
Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Aidaid MIT - Tekonsha P2 - ARS Billet Grill
03-15-2012, 10:24 PM #596
2009 chevy 1500 z71 4x4
- Join Date
- Sep 2009
- Northern GA
- Blog Entries
2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod
03-15-2012, 11:06 PM #597
Ordered autobot valve caps. Yup ... autobot valve caps!
03-16-2012, 07:32 AM #598
Replaced yet another O2 sensor. This one is the upstream one, bank 2.
03-16-2012, 06:19 PM #599
03-16-2012, 06:53 PM #600
I noticed that when I smoked my fog lights (not as dark) the light appeared more yellow, have you noticed this w/ the headlights?
I've watched videos on smoking lights and they make it look so easy by speeding up the time lapse.
You mentioned 4 hours of labor, what were some of the issues you had? I assume you did a wet application? Did you uninstall your lights to do this?
---------- Post added at 07:53 PM ---------- Previous post was at 07:41 PM ----------
Today I went to a custom vinyl graphics place to check out my options for wrapping my bumpers in vinyl. Thought it would be much cheaper than trying to get bumper covers or paint my bumpers and it was so I scheduled my appointment for 2 weeks from today. I'm doing a very dark smoke grey color (Pantone Matching System 425). When I go to the appointment they said they would print some bigger swatches so I could get a better idea of the contrast against the black paint and the grey plastic underneath the bumper. I'm also doing the bowtie on the grille the same color so it contrasts a little more.
Hard to get a visual because a monitor can skew the actual color but here is a link:
By ZSI52 in forum General Chevy & GM Tech QuestionsReplies: 47Last Post: 09-03-2012, 01:32 PM
By pmf608 in forum Chevy Truck TalkReplies: 21Last Post: 07-25-2012, 10:53 AM
By texas99lb in forum Chevy Silverado Forum (GMC Sierra)Replies: 10Last Post: 01-06-2010, 01:13 AM
By Delmarva in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 11-11-2009, 11:39 AM
By etpn13 in forum GM PowertrainReplies: 2Last Post: 04-22-2009, 02:45 PM
Tags for this Thread