Results 2,031 to 2,040 of 2281
-
03-20-2013, 06:24 PM #2031
I went to a local muffler shop and had a flowmaster exhaust on. Sounds deep and mean
just like I wanted it.

They keep saying the right person will come. I think mine is my truck.
"No offense" means "I'm about to insult you,but don't get mad."
03-20-2013, 07:12 PM #2032Jr. Apprentice
- Join Date
- Feb 2013
- Posts
- 14
Today I put Bilstein 5100 shocks in rear of 2001 gmc 2500hd turbo diesel p/u. Damn fronts didn't show up!
03-20-2013, 09:19 PM #2033
Today I thought I got my new black mesh grille but they sent me one for an 08 super duty. Waiting on my RK sports ram air hood and then I will be installing all of it with my Fab Four bumper and 10k warn winch. Haven't been on for awhile I just joined the real world and graduated college and started work full time. Also ran into a Toyota in a nasty pile up on 85
2009 chevy 1500 z71 4x4
2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,Black On black exterior,Black out interior trim,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around on stock tint,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked
03 cobra convertible and coupe
1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod
03-20-2013, 09:31 PM #2034
I installed a 7" double din. I think I got a wire crossed because now the battery won't hold a charge. I'll figure it out in the morning, I've been up way too long today.
Sometimes the best part of my job is that my chair swivels.

03-21-2013, 10:46 PM #2035
Picked up my front air manifold bracket and coalescing filter bracket from the machinist. We noted that he might have trimmed too much material for the front air manifold bracket's mount points ... specifically because we took our test fitting with a nut left on the intended mount studs ... rather than with it removed. He fabbed up a pair of spacers for me, just in case. I'll do the real mount work, this weekend, and if the spacers end up being needed then I'm going to use them as a temporary solution while I have him fab another set of mount points to the proper length.
Next stop, hardware store!
2004 GMC Sierra 1500 5.3L V8 4x4 SLT Extended Cab Long Bed
(Garage Link: http://www.gmtruckclub.com/forum/sho...MC-Sierra-1500)
NRA Certified Instructor, Range Safety Officer, & Benefactor Member
"I have sworn upon the altar of God eternal hostility against every form of tyranny over the mind of man." -- Thomas Jefferson
"The only difference between the topic police and the thought police ... is spelling." -- Anonymous
03-21-2013, 11:31 PM #2036Sr. Apprentice
- Join Date
- Mar 2013
- Location
- Franklin, TN
- Posts
- 40
Line-X'd the bed yesterday and added bed rail caps- Bushwhackers. Four new tires today.
03-22-2013, 05:20 AM #2037
Got gas and put in a bottle of GumOut total engine cleaner. Was only 5 bucks so why not try it to see if it helps clean up/out the engine.

1996 Chevy Tahoe LT 5.7L V8 4X4 199,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.
Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door
03-22-2013, 08:07 AM #2038
drove it to work with little or no heat in the 20's........... I might be more successful designing my own heating system for vehicles.
2000 Silverado 1500 Ext Cab, 2WD Vortec 5.3 | K/N Cold Air Intake | Monroe Sensa-Trac front shocks | Monroe Sensa-Trac load adjusting rear shocks | Built in Canada | OEM replacement Headlight casings |OEM replacement Tail light casings | Kenwood Excelon Head Unit | Focal Speakers | Dash Cam | 265/70R16 Michelin LTX M/S2 | Rebuilt Transmission |Bosch Platinum 4 plugs | 2nd replacement windshield | G80 | Silverstar Ultras | Dual Yellow Tops | Black Lights | Fog Machine | 1500W Power inverter | 400W AMP | BlueTooth 3.x for hands free dialing | HD Radio Tuner | Diablo InTune Tune :great:| 6000K HID Lowbeams | 6000K HID High beams|All interior lights are 6000k LED's|Blue LED's in my cluster pack|LED's in Third Brake Light |WeatherTech front digitally matched floor mats |"Big 3" Electrical Upgrade |
03-22-2013, 09:29 AM #2039
Installed 2 new O2 sensors and a new passenger side mirror...waiting on my repaired gauges, knock sensors, rear calipers & pads and AC control unit to arrive!
Opiewho
2004 Silverado 2500HD W/T
6.0L, RWD, Auto w/Towing Package
03-22-2013, 03:35 PM #2040
Truck made the weirdest noise while leaving school parking lot... sounded kinda like a tire blow or a line, but I shut her off and walked around and found nothing..... I will check all vitals and under truck now that I'm home... Would the engine cleaning product cause a weird noise because its trying to remove deposits and such..
- - - Updated - - -
Checked all vitals everything is with in spec checked all tires and suspension components all are in good shape... no leaks minus the ones I know about. Truck sounds a little rough but it has for months its not a fan of the cold since until I owned it it stayed in a nice warm garage in the winter. I will keep my eye on all gauges and fluids the next few days.
Similar Threads
-
I Seafoamed my truck today.
By ZSI52 in forum General Chevy & GM TechReplies: 47Last Post: 09-03-2012, 01:32 PM -
Put the truck in the ditch today
By pmf608 in forum Chevy Truck TalkReplies: 21Last Post: 07-25-2012, 10:53 AM -
Truck died twice today...
By texas99lb in forum Chevy Silverado Forum (GMC Sierra)Replies: 10Last Post: 01-06-2010, 01:13 AM -
Truck in the shop today...
By Delmarva in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 11-11-2009, 11:39 AM -
truck over reved today?
By etpn13 in forum GM Powertrain TechReplies: 2Last Post: 04-22-2009, 02:45 PM
Tags for this Thread


Reply With Quote

1965 Chevy C10
Brutus
Moonbounce
VIGIL
The Tahoe
2000 Chevy Silverado
BRZ the truck tows to the track
Truck



Bookmarks