Results 2,041 to 2,050 of 2390
03-22-2013, 09:23 PM #2041
^ Sounds like a backfire.
Tonight got the new rear calipers installed with new pads,brakes bled, installed new AC/Heater Control!
2004 Silverado 2500HD W/T
6.0L, RWD, Auto w/Towing Package
03-23-2013, 09:32 PM #2042
- Join Date
- Dec 2011
- Blog Entries
Thanks @Opiewho I just hope it didn't hurt the truck. Very rare for a modern vehicle to back fire randomly.
- - - Updated - - -
Update on my truck: while starting it today it sounded very rough and the idle was weird, it went away in eventually but it was weird. Even the exhaust was shaking from it it sounded like every once in a while it would surge then return to norm. Also smelled like unburnt gas.
1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.
Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door
03-24-2013, 06:55 PM #2043
- Join Date
- Jul 2007
- Henderson, NV
- Blog Entries
Finally installed my Volant Ram Air Scoop! Ended up removing the lower few inches off the air dam to get it to fit proper, but it all turned out quite well! Need to put about 100 more miles on the truck and then see if I'll need to retune the truck.
2010 GMC Sierra 1500 SLE Extended Cab Z71 4X4 5.3L Flex Fuel
MagnaFlow single in duel out system
Volant CAI & Ram Air Scoop with Power Core Filter
Rhino Tuff Grip Spray in Bed liner
Undercover Classic Tonneau
Trail FX Bug "deflector"
AVS Window Deflectors
Black Powder Coated Nerf Bars
RECON L.E.D. Interior, 3rd Cab light, Projector headlights, and Taillights
ATX Crawl Wheels wrapped in BFGoodrich Rugged Terrain tires
CalTrend Neoprene seat covers
2" leveling kit from Max Trac
Diablo Trinity with Diablew Tune
03-24-2013, 07:32 PM #2044
- Join Date
- Feb 2013
- Spokane, wa
Kind of a cool thread..lol. Today mostly I just drove her to the store. I did attempt to contact the dealer for a little production info on my trucks specific package.....but of course, they have never heard of it. Then they tried like hell to buy it off me..lol Good times..14/88
03-24-2013, 08:28 PM #2045
- Join Date
- Mar 2013
- Franklin, TN
03-24-2013, 10:38 PM #20462000 Chevrolet Silverado
4.3L V6, 4L60E, 2WD, Single Cab
Poweraid TB Spacer
Flowmaster 10-series exhaust (dumped)
Edge CS insight monitor
LS-1 Dual Electric fans
Corvette tranny servo swap
Head Unit: Alpine
Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
Subs: 2-12" Kicker CVT's
Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)
305/70R16 NITTO Terra Grapplers
16" PROCOMP 7089's
2" leveling kit
3" Fabtech Spindle Lift Kit
Front/Rear-Bilstein 5100 shocks
35W HID Low Beams
RECON LED smoked roof cab lights
HELLA LED taillights and 3rd brakelight
HELLA FF-75 Aux. Reverse Lamps
RIGID dually D2, flush mount, wide beam
Hawk HPS Brake pads
Russell braided steel brake lines
Powerstop-red powdercoated brake calipers
Powerslot Cryo brake rotors
EGR in-channel window visors
03-25-2013, 01:12 AM #2047
- Removed my AVS Aeroskin hood protector (bug guard), removed the OEM double-sided tape from it, cleaned and degreased the hood and both sides of the hood protector, added 3M heavy duty double-sided tape, and replaced the hood protector on the hood
- Installed a custom-fabricated coalescing filter bracket
- Shortened the hose from the coolant reservoir to the radiator so that it doesn't contact the coalescing filter or the filter's bracket
- Evacuated the AC system
- Removed the flange nuts that hold the accumulator in place
- Replaced said flange nuts with lock washers and custom-fabricated aluminum posts
- Bolted the front air manifold mounting plate to the custom aluminum posts
@Conlan Rose, here are some pics of the front air manifold bracket, as I know you were interested. (I'll get pics of the coalescing filter bracket, the coalescing filter, and the front air manifold when I'm ready to mount and plumb them all.)
Here are the custom-frabricated posts for the bracket:
And here's the completed bracket / mounting plate:
I was too tired and cold to recharge the AC system, so it waits until later this week...
03-25-2013, 05:22 PM #2048
I received my switches from OTRATTW. Now I can move forward with my light install.
2011 GMC Sierra SLE - 5.3 - 4X4 - Z71 - King Shock Level Kit - Body Color GMC grill emblem - 2 Tone Engine Cover, Rad Cover and Battery Box - Volant CAI - Tru Cool 40K tranny cooler - Sylvania ZXE bulbs Hi/Low -TriFold Hard Tonneau Cover- CoverCraft Seat Covers - Diablo inTune - GoRecon LED under rail lights - GoRecon LED White Lightning Tailgate Light Bar - Windows tinted to 45%- Kenwood DNX6990 - JL Audio C5-650 &650X- JL Audio Amp- Interco Truxus M/T 33x12.50x18
03-26-2013, 07:42 AM #2049
Installed a new passenger side window crank handle to replace the broken one! Yes...my truck has crank up windows.
03-26-2013, 11:41 AM #2050
Attempted to refill my AC system but the high side schrader valve stuck open and absolutely would not jiggle shut. I spoke to a stealership, as the high side port did not appear serviceable. An OEM replacement is 81 bucks and is in stock, locally ... and requires replacement of the entire line from the condensor to the connection near the low side. (This also means grille removal and the like to replace the line.)
The worst part about the situation is there's a TSB out for this .. and the replacement part STILL DOES NOT have a serviceable valve. WTF? If you know there's a problem then design a part that fixes it ... or design serviceability into the replacement solution.
Sometimes GM makes me mad...
By ZSI52 in forum General Chevy & GM Tech QuestionsReplies: 47Last: 09-03-2012, 01:32 PM
By pmf608 in forum Chevy Truck Talk & GM NewsReplies: 21Last: 07-25-2012, 10:53 AM
By texas99lb in forum Chevy Silverado Forum (GMC Sierra)Replies: 10Last: 01-06-2010, 01:13 AM
By Delmarva in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last: 11-11-2009, 11:39 AM
By etpn13 in forum GM PowertrainReplies: 2Last: 04-22-2009, 02:45 PM
Tags for this Thread