Results 2,181 to 2,190 of 2390
04-23-2013, 07:22 PM #2181
2011 GMC Sierra SLE - 5.3 - 4X4 - Z71 - King Shock Level Kit - Body Color GMC grill emblem - 2 Tone Engine Cover, Rad Cover and Battery Box - Volant CAI - Tru Cool 40K tranny cooler - Sylvania ZXE bulbs Hi/Low -TriFold Hard Tonneau Cover- CoverCraft Seat Covers - Diablo inTune - GoRecon LED under rail lights - GoRecon LED White Lightning Tailgate Light Bar - Windows tinted to 45%- Kenwood DNX6990 - JL Audio C5-650 &650X- JL Audio Amp- Interco Truxus M/T 33x12.50x18
04-23-2013, 09:38 PM #2182
Tonight I endeavored to find a mounting location under the truck for a set of Shocker XL horns, but ultimately liked none of my options due to rock, dirt, and debris concerns. So, I pulled the grille off and located some down-firing locations behind the grille based on individual bell length. Next I took some rough measurements and determined that I need to get a 1" high x 26" long piece of steel or aluminum for use as a mount plate -- for which I intend to go shopping in the morning. I'll also need some L brackets to support the bottoms of the bells but I'll need to complete the primary bracket before I can suss those out.
Last edited by SurrealOne; 04-23-2013 at 11:04 PM.
04-23-2013, 10:03 PM #2183
04-23-2013, 11:42 PM #2184Charles 02 z71 Cladded Avy
Mods: eBay k&n Intake, highflow magnaflow cats & y pipe, 6" FabTech lift, 35" Pro Comps, Superchips #2715, SnugTop, 4.56's, MOOG front end
Wishes: LQ4 + a beefed up 4L60E
04-24-2013, 08:17 AM #2185
Replaced wipers, all 3 Universal Joints and the Shift Shaft Seal on the transmission. Now my 60-70mph driveline vibration is gone and my transmission fluid leak is fixed!
Next up, front idler, pitman, steering dampner and ball joints....Opiewho
2004 Silverado 2500HD W/T
6.0L, RWD, Auto w/Towing Package
04-25-2013, 12:14 AM #2186
Fabricated and fitted a bracket for my Shocker XL's out of 1/8" steel. Still need to fabricate polymer spacers, fabricate bell supports, paint all metal, and install it. Hopefully tomorrow.
Last edited by SurrealOne; 04-26-2013 at 03:15 AM.
04-25-2013, 08:27 AM #2187
- Join Date
- Feb 2010
- Lucedale, MS
- Blog Entries
Well, I guess it has started all over again now. I finely finished my truck a little over a year ago and have done almost nothing to it in over a year. Yesterday I put a new AC Delco 145 amp Alternator on my truck to fix the battery light problem. "220 dollars at the dealer for 145 amp and new" - "Re manufactured from advance 105 amp 300 dollars" I also ordered a new cowl hood for my truck and ordered a set of four Bilstien HD shocks. Will post more after installs.
04-25-2013, 08:39 PM #2188
New belts put on before it got dark.
04-25-2013, 09:02 PM #2189
MaMa, detailed the inside while I two wheeled to work! She's a Keeper........2010 GMC SIERRA CREW CAB (Silver) 4x4, ReadyLift 2.5" Level Kit, 305/60/18 Dick Cepek Mud Country, Go Rhino Nerf Bars, Husky Liners front and rear, Bushwacker Bed Rail Caps, Custom tuned. 4:11's
04-26-2013, 03:33 AM #2190
- Removed the grille and front bumper
- Removed the transmission cooler
- Fabricated 4 polymer spacers for the Shocker XL's
- Fabricated 4 (different) bell supports for the Shocker XL's
- Painted the bell supports
- Installed the Shocker XL's to the main mounting bracket
- Installed the main mounting bracket (with bells) and bell supports into the nose of the truck
- Installed a 1/2"OD compression fitting to the upstream port of an electric air valve for the Shocker XL's
- Installed a 4-port manifold for the Shocker XL's to the downstream port of the electric air valve
- Installed the electric air valve (w/ manifold) for the Shocker XL's into the nose of the truck
- Fashioned a new ground point for the electric valve and connected one lead of the electric valve to it
- Sized, cut, routed, connected, and zip-tied into place 4 nylon air lines from the 4-port manifold to the Shocker XL's
- Reinstalled the transmission cooler
The bumper and grille will remain off, for now, so that I can plumb an annealed copper hard line from the front air manifold (in the engine compartment) to the electric air valve and so that I can run switched +!2v to the electric air valve from the horn selector switch in the overhead console. Hopefully that'll be done this weekend, at which point I should be able to reassmble the nose of my truck.
By ZSI52 in forum General Chevy & GM Tech QuestionsReplies: 47Last: 09-03-2012, 01:32 PM
By pmf608 in forum Chevy Truck Talk & GM NewsReplies: 21Last: 07-25-2012, 10:53 AM
By texas99lb in forum Chevy Silverado Forum (GMC Sierra)Replies: 10Last: 01-06-2010, 01:13 AM
By Delmarva in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last: 11-11-2009, 11:39 AM
By etpn13 in forum GM PowertrainReplies: 2Last: 04-22-2009, 02:45 PM
Tags for this Thread