Results 1 to 3 of 3
Thread: Encoder sensor replacemente?
03-04-2010, 11:32 AM #1
- Join Date
- Mar 2010
Encoder sensor replacemente?
I searched the threads... I have an 04 Sierra Z71 with the 5.3
I think my encoder motor is bad. I replaced the push button swtich and it acts the same...
The truck will engage in 4wd if I turn the truck off for a min, and select 4wd hi/lo or auto
after the truck runs for a few minutes the "service 4wd" light comes on.
I want to try replacing the Sensor first before trying anything else. My OBDII scanner wont pull any codes on it.
Does anyone have instructions on replacing the sensor?
03-04-2010, 01:43 PM #2
pull your t-case shield and front prop shaft off. 3 bolts and its outGM TECH
05 silverado shortbed
03-04-2010, 01:45 PM #3
From what I get out of a bad sensor is that it will generally throw a code of C0327. If there's no code it sounds more like a bad motor.Patrick
By Mtrotter in forum GM Electrical TechReplies: 18Last Post: 12-02-2011, 02:37 PM
By Mtrotter in forum GM PowertrainReplies: 0Last Post: 05-10-2010, 05:59 PM
By Higgie in forum GM PowertrainReplies: 1Last Post: 11-25-2009, 07:40 PM
By BlackPearl in forum GM PowertrainReplies: 1Last Post: 04-18-2008, 12:15 PM