GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 9 of 9
  1. #1

    Default Hello from Ohio - Need driveshaft~

    Hello from Geneva, Ohio. I love my '94 Yukon Sport with 185,000 miles. My differential pinion seal is leaking pretty bad and I'm considering replacing it myself. I thought that I should also replace the u-joints and drive shaft as well since NE Ohio winters and salt have rusted both. Can this all be done without opening up the differential cover?

    Thanks for the help,
    Tom

  2. #2

    Default

    Welcome to the GMTruckClub! As far as I know you should be able to accomplish this work w/o opening up the differental. There are some real gearheads around who can give you a better answer though. Good luck!


    2010 Z/71 Colorado C/C
    Black 4X4 w/5.3L V8
    ===============
    2007 Winnebago Adventurer
    w/8.1L Chevy & Allison 6spd.
    Canyon Lake, Texas

  3. #3

    Default

    Thanks for the welcome! I'm also looking for a drive shaft for the Sport - haven't had much luck online. Going to try NAPA this weekend.

  4. #4
    Legend
    Eddie Z71's Avatar
    Join Date
    Mar 2009
    Location
    Colorado Springs, CO
    Posts
    3,838
    Blog Entries
    1

    Default

    Hi, and welcome to the site! Hope you find it this weekend! Good luck!
    Eddie , 2000 Chevy Tahoe Z71 (old style)

  5. #5

    Default

    Welcome to the site!!
    If you find yourself slipping,.....tie a knot.....hold on tight

    Black
    2008 silverado
    1500 crew cab
    5.3 L 4x4
    Borla exhaust, rbp black tip
    tint, bed liner
    2.25 in ready lift leveling kit
    18x9 rbp 94r
    33x12.5x18 toyo mts

  6. #6

    Default

    Welcome to the site!

    Bobby - North Carolina
    2008 4x4 5.3L V8
    6" Suspension Lift and 1.5" Body Lift
    20x9 Ballistic Jesters w/35" Toyo Open Country MT's & 1.5" rear wheel spacers
    4:56 Yukon Gears
    Hypertech Speedometer Calibrator
    Baja style bed mount spare tire carrier
    Flowmaster 40 series dual exhaust
    Recon Smoked LED tails/3rd brake lights/black projectors w/switchback LED's in the corners
    N-Fab Nerf Steps
    K&N CAI
    No Fear Pedals
    Tint, Line-X bedliner, Window visors, Rear wheel well liners
    Painted front grill, bow ties and door badges, de-"lettered" tailgate
    Powder coated front and rear bumpers

  7. #7
    Legend mmorgan1865's Avatar
    Join Date
    Feb 2010
    Location
    Port Orange, Florida
    Posts
    1,067

    Default

    Glad to have you aboard.
    Morgan
    2010 Silverado Ext. Cab LTZ 2 WD 6 ft bed
    5.3L 6 speed w\ 3.08 rear end
    Navigation Package
    Westin lighted boards
    Undercover SE tonneau cover
    It's a start!

  8. #8

    Default

    you should be able to do all this work in your garage. Look up the pinion preload in chiltons before you start so you can make sure you have the right tools to do the job.
    Heres a great place for driveshafts that I've used to have a few custom ones made at reasonable prices.
    http://www.4xshaft.com/index.html

  9. #9

    Default

    Thanks for the link! Broke off 2 studs on the diff. cover and gave up! Just took it to the shop. They replaced 2 u-joints, pinion seal, drilled out the 2 broken studs and replaced rusted out cover. $400. Almost worth it. I may replace driveshaft myself later.
    Thanks again, Tom

Similar Threads

  1. Driveshaft???
    By Steve C in forum GM Powertrain
    Replies: 1
    Last: 12-13-2009, 08:41 AM
  2. Help driveshaft
    By 2ToNe04 in forum GM Powertrain
    Replies: 5
    Last: 10-08-2009, 10:05 AM
  3. Help with driveshaft
    By bangman901 in forum General Chevy & GM Tech Questions
    Replies: 6
    Last: 09-27-2009, 08:55 PM
  4. driveshaft help
    By bangman901 in forum GM Powertrain
    Replies: 0
    Last: 09-25-2009, 04:08 PM
  5. driveshaft?
    By AJ's Sierra in forum GM Powertrain
    Replies: 8
    Last: 07-10-2009, 07:22 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •