GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 Last Post byLast Post by
Results 1 to 10 of 13

Thread: Bumper Question

  1. #1

    Default Bumper Question

    So way back in December I rearended a Integra. My front bumper was the only thing damanged (thank God). So instead of paying my $500 insurance deductable I thought I would do it my self and save some money. How hard is it to replace the front bumper and brackets? Do I have to take off the grill and every thing?

    2000 Silverado Step Side 4.8 Vortec

  2. #2
    Jr. Mechanic Prophet1990's Avatar
    Join Date
    Dec 2009
    Location
    Waueksha, Wisconsin
    Posts
    107

    Default hey

    hey someone hit the side of my bumper (never found the person) and im just gonna get a bumper from a junk yard and do it my self but from what my father said its not easy cause you have to bust the bolts lose as well as find the air bag sensors other then that I do not believe you have to take the grill off but im stull unsure of what the steps are in order to do this project, ill look around as well and hopefully find them, also btw i know that if you want to take off the front tow hooks and either keep them out of replace with other ones the bumper needs to come off.
    2000 Chevy Silverado 1500 Z71 323 5.3L V8
    -K&N 57 Series Generation II - Cold Air Intake
    -JVC Deck - KD-HDR50

    -New Transmission
    -New Rear End
    -New Alternator, Battery and Starter
    -Key-less Entry (Thanks aboston)
    -Bed Liner w/mat

    -
    Blue Xenon Headlight
    Bulbs (High/Low)

    Other Toys
    -2008 Buell 1125R
    -2003 Mustang GT Premium (500horse)
    -2010 Polaris 800 IQ


    Looking for a 1990 454 SS 1500 to buy

  3. #3

    Default

    Be very careful around the airbag sensors, even with a disconected battery those things have been known to go off.
    The bumper should be able to come off without removing the grill, the bracket bolts might be a little hard to bust loose so make sure you've got a cheater bar on hand.

  4. #4

    Default

    Wow... I didnt even think about the airbags so Im guessing I should prolly invest in a Chilton manuel to find where exactly these things are. Also my Dad bought me a 106 pc socket set will that work or do I need to rent a air compressor and some air wrenches? Thanks for the info

  5. #5
    Jr. Mechanic Prophet1990's Avatar
    Join Date
    Dec 2009
    Location
    Waueksha, Wisconsin
    Posts
    107

    Default hey

    Pen I htink we are about the same age haha! anyways umm all you need is the correct size socket and then i suggest a 2 foot or well 3 foot breaker bar and extension for the socket, an impact wrench might me a bit awkward to fit in there (i have still yet to replace my bumper btw)

  6. #6

    Default

    Chiltons at the very least get a good look up behind the bumper and familiarize yourself with everything back there.
    I dont think you'll need an impact gun or air wrench and like posted I dont think you'll have room to get them in there, a good sturdy wratchet (preferably one with a no questions asked warranty) and a couple feet of pipe to fit over the end of the wratchet handle for a little added leverage will usually do the trick, pull hard but use caution so if/when something breaks loose you dont hurt yourself or hit something important.
    The best start to a good toolset is a complete set of sockets.

  7. #7
    Jr. Mechanic Prophet1990's Avatar
    Join Date
    Dec 2009
    Location
    Waueksha, Wisconsin
    Posts
    107

    Default i agree

    I agree with tim keep me posted Pen (add me as a friend if youd like) maybe take some pictues durting the job so i can see what to expect! thanks a million

  8. #8

    Default

    Sounds good thanks for all the info yall! Ive been lookin at my baby for too long with that shiner on her face and its gettin real nice now so its time to get it fixed. Oh one more thing does any one kno when you go to a junk yark to buy a bumper does it come with everything (top/bottom plasics, brackets) or just the chrome bumper?

    Prophet Im 23 so we might be the same age but ill shoot ya request and keep you updated with the project

  9. #9

    Default

    Theres no standard of what a yard will include on an item, if they dont include the plastics and brackets you probably gotta bargain with them, the best way is if you dont think the price is right tell'em no thanks XYZ yard will sell me the whole thing for $XX amount.

  10. #10

    Default

    lol yea thats why I was thinkin, cause I called Kikers U-Pull here in Pensacola and the man quoted me at $150 which is pretty good cause Gieco is giving me $151 and some change for what they would have to pay if I had their shop do it

Page 1 of 2 12 Last Post byLast Post by

Similar Threads

  1. Question about bumper swap
    By KidHauler in forum General Chevy & GM Tech Questions
    Replies: 0
    Last: 04-03-2010, 06:39 PM
  2. Best extender bumper-bumper warranty
    By bbuxton1 in forum General Chevy & GM Tech Questions
    Replies: 0
    Last: 07-26-2009, 01:33 PM
  3. Replies: 0
    Last: 08-19-2008, 02:17 PM
  4. Bumper question
    By John W in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 1
    Last: 09-03-2007, 04:19 PM
  5. Bumper rating and towing capacity of the bumper
    By Gon84 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 2
    Last: 03-19-2007, 07:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •