GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default 95 k1500 lt1/ls1/ls2 swap?

    Ok i have a 95 k1500 z71. I have decided to do an engine swap on it with either a ls1/2 or a lt1. If i did this what would i have to do as far as ecm goes or do yall think i should do a carb conversion to it.
    Green-N-Silver Express
    '95 Z71
    Flowmasters
    Future lift and wheels and tires

  2. #2

    Default

    Yea I was thinking of doing the same thing.I have the 4.3 in my 92 and my limitations were weight and torque.The ls1/ls2 weight was around 390 and the torque for the ls1 around 350.Im going with an ls1 when I can bank it just so I can keep the nv3500 trany.Doing the searching to make sure the block and trany will mate corectly,fit the moter mounts and avoid suprises. These engines require there own ECM and stock stuff wont do.

Similar Threads

  1. big block swap question - 98 k1500
    By GaryG in forum Performance & Fuel
    Replies: 9
    Last: 05-17-2010, 06:14 PM
  2. rear end swap or gear swap
    By rmagni in forum GM Powertrain
    Replies: 4
    Last: 08-18-2009, 07:42 PM
  3. 1993 k1500 transmission swap
    By okysmokey911 in forum Chevy C/K Truck Forum
    Replies: 5
    Last: 05-23-2009, 11:58 PM
  4. 93 K1500 O2 sensor swap
    By collinsperformance in forum General Chevy & GM Tech Questions
    Replies: 0
    Last: 05-17-2008, 09:03 AM
  5. 93 K1500 350 coil swap
    By collinsperformance in forum General Chevy & GM Tech Questions
    Replies: 0
    Last: 05-17-2008, 02:51 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •