Results 1 to 3 of 3
Thread: Torsion Keys...
03-17-2010, 10:41 AM #1
I can see I have lots of adjustment left. So do I just tighten the bolts some more to raise the front end.. I just want a 1/2" or so & to level the front end out. The driver side is 1/4" higher than the other side.
I have them soaking in WD/40 for a week.95 tahoe 2dr 4x4 200,000+ miles
03-17-2010, 11:14 AM #2
Its best to lift the front and take the weight off the front end when adjusting the keys. Yes just tighten them. Before you begin measure from the front wheel hub to the top of the fender on both sides and wright these measuements down so you have a record of were you started in case you want to go back down and also so you know how much you raised the truck.
03-17-2010, 11:24 AM #3
Thanks..You can look and see one bolt is in more than the other. I will put it up on jack stands. I dont want to lift it, just leveling the front end...Must of had a big girl riding shotgun...lol...95 tahoe 2dr 4x4 200,000+ miles
By devilsalmostfree in forum Lifted & Offroad SuspensionReplies: 0Last Post: 03-14-2010, 07:03 PM
By chevyman5.3L in forum Lifted & Offroad SuspensionReplies: 12Last Post: 08-26-2009, 10:00 PM
By trailshredder in forum Lifted & Offroad SuspensionReplies: 2Last Post: 07-15-2009, 09:03 AM
By black jack in forum Lifted & Offroad SuspensionReplies: 12Last Post: 03-26-2009, 09:38 PM
By vncj96 in forum Lifted & Offroad SuspensionReplies: 6Last Post: 02-05-2008, 09:55 AM
Tags for this Thread