GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 10 of 17

Thread: 75 caprice vert

Hybrid View

  1. #1

    Default 75 caprice vert

    hey guys ,

    i am back to work on my car, i am doing the trunk right now,

    it is harder than i thought it was lol,doesn't help all my shop tools are in the wood shed, i mean a full wood shop of tools, i had to make room for my car, i had a feeling there was a downside to getting this car,

    the top is shot and there is noone around here that will replace it, then i heard 3000 and i really don't need a top, i would rather have a elcamino myself lol

    so i started to build my trunk enclosure, this is gonna need some time invested in it lmao, problem is the car is low and i am tall wtf,

    so now i have some figurin to do, whats next basically lol its in my head, just got to figure it out

    later guys

  2. #2


    Wow, your trunk is a lot smaller than my 76 Impala.

    I made my sub enclosure so it was removable.

    Good luck on your project.
    Pavement sucks... :grrrrrr:

    1994 K1500 4x4 Ext. Cab
    PCM chip and Xenon 8000k bulbs bored over .050"
    balanced Crank, 10:1 compression
    Flat top pistons,cam,ported heads
    Option Racing Cold Air Intake
    Holley Throttle Body Spacer
    Accell Igition, 45kv coil
    FloTech Headers, no CATs, dual exhuast
    Goodyear Silent Armor A/T 305/70-16
    Pioneer SupertunerIII CD USB Bluetooth
    Kicker ZX200.2 ZX Amp
    Kicker Audio COMP 10" Subwoofer

  3. #3


    Quote Originally Posted by ejohnson03 View Post
    Wow, your trunk is a lot smaller than my 76 Impala.

    I made my sub enclosure so it was removable.

    Good luck on your project.

    i was thinking the same thing, when i seen yours, but i was thinking engine lol,

    must be because its a vert,

    yea mine will be removable also, i hope haha

    thats not the final resting place yet,

    i will work on it today and see if i can get something done thanks

  4. #4


    i scrapped the original plans and stepped up my game a little, it is a 4 piece removeble unit now, hard to say out it will look after wrapping,

    this is the second time doing something like this so it is what it is,

  5. #5


    Lookin' good Bro....

  6. #6


    i changed that already lol

  7. #7


    just so ya know i went out and got me fur, i was so close to jaguar print for that pimp look lmao,i really was lol, but then i seen some black curly fur, itis real soft and it was onsale so thats what i got,

    i found some peel and stick marble tile that matches my hood, and its glossy so that won for the floor, you only see so much anyway,

    so i hurry home to start my assault put my newly resined pieces in, went to check the trunk for the 18000th time and it would'nt shut,

    arrrrrrrrrrrrrrrrrrrrgh, wtf sob gdimf, i't s only 100 bucks right, thats what i get for doing it too tight, i must of been on the edge the whole build, i figured i left enough clearance but i had to put two pieces on the top of the back piece where it swoops , i took that out and the other pieces are tight also but i think i can modify it,

    i forgot about the piece that wrapped the bottom so that could of been, where the extra height came from, i will have to sand that off too, wish me luck, or wait for the fire pics, later

  8. #8


    so i am turning it around for the better,

Similar Threads

  1. Replies: 0
    Last: 07-27-2010, 11:30 AM
  2. Replies: 0
    Last: 04-28-2010, 07:00 AM
  3. Replies: 4
    Last: 01-25-2010, 01:53 AM
  4. Replies: 0
    Last: 10-06-2009, 03:18 AM
  5. Replies: 0
    Last: 10-05-2009, 03:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts