Results 1 to 5 of 5
Thread: Fender Flares
03-20-2010, 11:23 AM #1
I posted a thread in the commercial truck forum, but haven't gotten any responses.
I hate the stock fender flares I have now as they are about 1.5, to 2 inches too narrow. The front tires tend to sling mud onto the hood and I'm afraid I'm going to beat up my front bumper too.
Most people probably wouldn't care, but I plan on having this truck for a very long time if I can, so I want to do my best to protect the body and cab.
So, who knows where I can order two front fender flares that are wider than stock. Most come in kits of four, and I don't need the rears.
Nick2001 Chevy 3500HD, Cab and Chassis. 2wd, 8.1 liter vortex 8100 motor. 15000 lbs GVWR, 19.5 inch rims, and a 4L80E auto transmission.
10 foot Rugby Dump bed with drop sides, Flink under tail-gate salt spreader, 9 foot Fisher trip edge plow, and central hydraulics ran by belt driven pump under the hood. And a bunch of strobe lights.
03-20-2010, 01:17 PM #2
You can buy fenders from stylintrucks.com i belive, don't quote me on that though. Try bushwacker cut out, probably stick out farther then any other ones i've seen. Unless you want to get the rubber inserts that add another inch or two of coverage, kind of like the inner wheel well, that plastic/rubber, just extended out the wheel wells.
2002 Chevrolet Silverado 1500 z71 1985 Chevrolet Silverado k10 2006 Chevrolet Silverado 2500hd 6.6l LLY Duramax 6.5" BDS Suspension Lift Key'd to 9" Edelbrock Carb & Polished Intake Manifold & Valve Covers NAPC Race Transmission & NAPC Built Transfer Case EFI Live Comp Cam and Valvetrain Snow Performance Methanol Injection 35" Toyo Open Country Mud Terrain on 18" Ion Alloy 179's Headman Long Tube Headers and True Dual Exhaust FASS 150gph Titanium Series Pump AirAid Cold Air Intake with K&N Dry Filter & AirAid PowerAid Throttle Body Spacer 2" Suspension Lift 33x12.50r15 Tires PPE Tuner until i tune it with my EFI Live Pacesetter Long Tube Headers with Cats Gone True Dual Exhaust FlowPro 3.73 Gears Yukon Grizzly Locker with Mag-Hytec Cover & Traction Bars NGK Iridium Tips & MSD Ignition Plug Wires Baja Spare Tire Holder Leveling kit & 34.5" Nitto Grapplers 18" XD Rims Innovate LC-1 Wideband o2 Sensor x2 HID's all around LED taillights and 3rd brake light BDS Dual Steering Stabilizers Pioneer Double-DIN Touchscreen Navigation with Two 10" Subs under rear seat Electric Fan Autometer Pressure, Boost, and Pyro Gauges 4.56 Gears AFE Stage 2 Intake
03-20-2010, 08:08 PM #3
Those inserts might be the way to go. That would probably be the cheapest. My only other thought is that I'm not too fond of the gray fender flares and I could switch them over to black ones.
Through my searches on the flares I hadn't run across the inserts. Do you know who carries them???
03-30-2010, 07:32 PM #4
Gambit, on the forum here has a truck our body style with the fenders i'm kind of talking about, his look a little more heavy duty then others i've seen though.
03-30-2010, 09:01 PM #5
Check out stylintrucks.com.......you can get bushwacker fenderflares painted to match your truck!!If you find yourself slipping,.....tie a knot.....hold on tight
1500 crew cab
5.3 L 4x4
Borla exhaust, rbp black tip
tint, bed liner
2.25 in ready lift leveling kit
18x9 rbp 94r
33x12.5x18 toyo mts
By White Gardens in forum Medium-duty Truck ForumReplies: 3Last Post: 06-14-2010, 10:35 PM
By skulls17_bob in forum General ClassifiedsReplies: 2Last Post: 04-15-2010, 06:58 PM
By Pete95Sierra in forum Chevy Truck AccessoriesReplies: 6Last Post: 02-19-2010, 10:01 PM
By Dagwood in forum Chevy Silverado Forum (GMC Sierra)Replies: 2Last Post: 02-01-2010, 07:15 AM
By 04blackz71 in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 04-03-2009, 09:08 PM