GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4
  1. #1

    Default Sagging driver door

    The driver side door on my truck is sagging and I purchased replacement pins and put them in but one of the holes is worn to much so the pin doesn't press in. Is is possible to buy oversized pins anywhere or am I going to have to fab one up myself. I saw there is replacement hinge kits on Ebay but seems like a lot of work to grind off the old hinges and put new ones in. Any suggestions?

  2. #2

    Default

    Did you replace the bushings with the new pins?

  3. #3

    Default

    Yes the holes are rounded to much for the stock size bushing.

  4. #4

    Default

    Add a bead of weld to the worn area and re-drill the correct size...
    Still Loyal to GM after all these years...:shocked:
    2006 Impala LT 3.5L
    2005 Silverado WT small cab/longbed 4x4 4.3L V6
    1999 Grand Am 3.4L in TX w/ our youngest
    1993 GMC Jimmy 4.3L 4 door 4x4 'Ole Rusty' - 'SOLD'
    1988 S-10 small cab/longbed HT3.4L Crate Engine
    1970 Nova 250 I-6, factory 3 sp floor shifter.
    1968 Chevelle 'Nomad' Wagon 250 I-6 w/ 3 on da' tree.

Similar Threads

  1. 99 Tahoe driver door sagging, won't close correctly
    By sresendes in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)
    Replies: 12
    Last Post: 04-20-2010, 07:15 AM
  2. I need Driver door alignment help
    By bsharles in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 10
    Last Post: 02-26-2010, 07:17 AM
  3. driver door???
    By joshs02ss in forum General Chevy & GM Tech Questions
    Replies: 5
    Last Post: 01-09-2010, 12:03 AM
  4. driver door wiring
    By macledo in forum The Coffee Shop ~ Chit Chat
    Replies: 1
    Last Post: 09-14-2008, 10:07 PM
  5. Driver Door rattles [Expired Topic]
    By cbearl78 in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 5
    Last Post: 09-13-2006, 07:21 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •