Results 1 to 2 of 2
Thread: Do it yourself bed liner
04-12-2010, 06:05 PM #1
- Join Date
- Dec 2009
- Minnesota/North Dakota
Do it yourself bed liner
I was wondering if anyone has attempted do it yourself bed liner such as herculiner?
A) does it work well?
B) How hard is it to apply?
C) any advice to the application process?2003 Chevy Silverado 4.3 V6 5-speed- Victory Red - Gibson Dual Sport Exhaust, K&N Intake, Goodyear Wrangler Silent Armors 265/75/R16 :great:
04-12-2010, 07:50 PM #2
Most people say the brush on liners don't work as well as the spray on systems and good results w/ either depends on the prep.
If you are handy go to www.por15.com and check out Pow-R-Liner. Their kit includes 4 quarts of liner, the activator and the spraygun for $179.50...covers 125 sq ft. They say you could apply it over their POR15 [paint over rust] product for extra protection but that is around $45.00 a quart plus you need their prep products so it could get as expensive as having a LineX spray job done where you get a waranty & keep your hands clean...Still Loyal to GM after all these years...:shocked:
2006 Impala LT 3.5L
2005 Silverado WT small cab/longbed 4x4 4.3L V6
1999 Grand Am 3.4L in TX w/ our youngest
1993 GMC Jimmy 4.3L 4 door 4x4 'Ole Rusty' - 'SOLD'
1988 S-10 small cab/longbed HT3.4L Crate Engine
1970 Nova 250 I-6, factory 3 sp floor shifter.
1968 Chevelle 'Nomad' Wagon 250 I-6 w/ 3 on da' tree.
By emtJoaquin in forum Chevy Truck AccessoriesReplies: 13Last: 12-24-2009, 02:44 PM
By MWright936 in forum Chevy Truck AccessoriesReplies: 37Last: 09-06-2009, 10:10 PM
By nickgiacalone in forum Chevy Truck AccessoriesReplies: 19Last: 08-30-2009, 11:11 PM
By daddytech in forum General Chevy & GM Tech QuestionsReplies: 1Last: 08-30-2009, 10:00 AM
By shs28078 in forum Chevy Truck AccessoriesReplies: 14Last: 08-27-2009, 11:24 PM
Tags for this Thread