Welcome to the GMTC - Chevy Truck Forum.
Chevy Truck Forum

GM Truck Club is the premier Chevy Truck Forum & GMC Truck Forum online ~ Since 2004.
Registered Users do not see the above ads. Register Today ~ It's Free and gives access to the whole website.

+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Newbie Sbully is a glorious beacon of light
    Join Date
    Mar 2007
    Posts
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default HELP....No Start

    Thanks in advance!
    97 suburban: The fuel pumps works fine, replaced the filter and have pressure at the valve. It runs off of starting fluid??????? Also have an open vacuum port on the purge check valve, it's the one directly under the plug. Small port not the 2 big ones on the bottom. Any ideas what plugs in there?

    Thanks, Steve
    Last edited by Sbully; 03-10-2007 at 07:59 PM.

  2. #2
    Legend 84fiero123 has a reputation beyond repute84fiero123 has a reputation beyond repute
    Join Date
    Jun 2005
    Location
    farmington, maine
    Posts
    1,659
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default No start

    Quote Originally Posted by Sbully View Post
    Thanks in advance!
    97 suburban: The fuel pumps works fine, replaced the filter and have pressure at the valve. It runs off of starting fluid??????? Also have an open vacuum port on the purge check valve, it's the one directly under the plug. Small port not the 2 big ones on the bottom. Any ideas what plugs in there?

    Thanks, Steve
    I had a similar problem, but mine would start and run with starting fluid.

    It was the ignition module.

    It controls much more than just the ignition now days.

    Technology is great, when it Works,
    And one Big Pain in the Ass When it Doesn’t.
    Detroit Iron Rules, All the Rest are Just Toys.
    94 GMC Burban, 5.7L (350), 4X4, Auto
    86 GMC Burban, 350, 2 WD, Auto
    79 GMC pickup plow truck, 400, Full time 4X4, Auto
    86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
    See a Pattern yet?

    15 year GM assembly line worker.


 

Similar Threads

  1. No start
    By k.daddy1 in forum Powertrain
    Replies: 1
    Last Post: 06-07-2010, 07:32 PM
  2. Aftermarket Remote Start with Factory Remote Start
    By Perpendicular in forum Audio / Video Electrical
    Replies: 12
    Last Post: 10-05-2009, 06:13 PM
  3. Car was hard to start then didn't start at all
    By bmxr123 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 1
    Last Post: 07-03-2009, 09:48 AM
  4. When should I start?
    By sask boy in forum General Chevy Tech Q&A
    Replies: 16
    Last Post: 02-19-2009, 10:29 AM
  5. dic/no start
    By rdgt2 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 6
    Last Post: 02-11-2009, 05:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts