Results 1 to 1 of 1
Thread: exhaust emissions 84 C-10
04-28-2010, 09:15 PM #1
- Join Date
- Apr 2010
exhaust emissions 84 C-10
I need to take the emissions pipes off of the exhaust headers on my 84 C-10. I was going to try a brake line wrench and see if that will work. I'm sure an open end wrench will not work, because I imagine the fittings are rusted on pretty good and the fillting will round off. I have periodically been spraying PB Blaster on the fitting hoping to free them up some.
I also thought about cutting the pipe and putting a socket on the fitting, but if it rounds off I will have a fitting I can't get out and a hole I can't plug.
Has anyone tried any other methods and had success? I may try taking these off this weekend.
oletrkguy in SC
By BigJosh in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 09-27-2009, 03:53 PM
By TRPLXL2 in forum The Coffee Shop ~ Chit ChatReplies: 21Last Post: 05-16-2009, 12:11 AM
By jprimrose4292 in forum General Chevy & GM Tech QuestionsReplies: 14Last Post: 04-13-2009, 01:52 AM
By Rob in forum Chevy C/K Truck ForumReplies: 6Last Post: 06-29-2008, 12:54 AM
By Steve in forum The Coffee Shop ~ Chit ChatReplies: 0Last Post: 12-22-2007, 09:30 PM